|
#1
|
|||
|
|||
G2 4.8V rollout
Sorry for all the questions as of late
I'm running a VRX CE with the stock G2 and 4.8v nimh. Medium size track. What rollout should I aim for? Heard people mention anywhere between 50 and 70! |
#2
|
|||
|
|||
Keep the questions rolling in, we are here to help :-)
50-70mm/rev seems about usual for most brushless systems. At my local clubs (where everyone uses 1s/12.5t or 2s/21.5t) we run on tracks that vary in size from 10x15m to 12x22m. Track layouts vary from week to week but we usually manage 28-32 laps in the standard five mins. The lowest roll out I have seen reputable drivers using on a regular basis has been around 58mm/rev and the highest is around 66mm/rev but it depends on their motor and speedo, as well as track size and layout. Personally, I run around 62mm/rev with my Dynamite motor and HW 1s speedo and a pinion lower if I use 2s/21.5t. It has been several years since I saw anyone running a competitive 4cell and silver can motor. From what I remember they geared a couple of teeth lower than the brushless runners did - the higher 4cell voltages still give less rpm than modern 13.5t brushless motors and silver can motors have much less torque too. Depending on your exact track size and layout I would suggest starting somewhere in the mid 50s mm/rev and be able to go up and down around that. James
__________________
James Garrett - BRCA GT12 Rep |
#3
|
|||
|
|||
Many thanks for all your advice, it's very much appreciated. I'll start by getting a larger spur, a 73t seems to give me the most rollout options.
|
#4
|
|||
|
|||
200SX, Jimbo is talking about brushless though rather than brushed.
So dont cook your motor! |
#5
|
|||
|
|||
No worries Dale. Fitted a heatsink with thermal paste. It was getting to 60c with the old 65/28 gearing and no heatsink so hoping it will be better. If it all goes wrong I have a speed passion ultra sportsman v3 13.5, some old saddle pack lipos, just need a 1s esc. I'll probably be back with some more gearing questions . The ultra sportsman isnt the quickest of motors. I was 2 laps off the pace of the top drivers, managed 4th place put of 8. Everyone else running brushless
|
|
|