|
#41
|
||||
|
||||
Sound. It should be mega at Bridgeford mate. I'm hoping to be there with mine, and at Worksop.
__________________
PBM Racing 01773 769323 TEAM XRAY RC DISCO |
#42
|
||||
|
||||
I see on David Ronnefalk latest carpet set ups he is using 1.8mm roll bars front and rear, the thickest from HB seems to be 1.5mm, any other makes of roll bar fit with a bit of tweaking?
Keen to try it on my car to tame it down on the high grip |
#43
|
|||
|
|||
Think I read somewhere he was using modded Kyosho ones.
|
#44
|
||||
|
||||
Cheers Toby
|
#45
|
|||
|
|||
Just a quick question about the rear shock tower plates, when mentioned on the set ups, it seems that people are running the 'c' tower with the outer hole on the wishbone, although I understood that the 'a' tower was the optimised one for the outer hole?
|
#46
|
|||
|
|||
I've now settled on the A tower with the outer hole on the arm for most situations. With my earlier setups running the C tower was to lower the shocks to lower the CG and reduce body roll.
|
#47
|
|||
|
|||
Hey Rich, any chance of sharing your latest setups? Cheers, Toby.
|
#48
|
|||
|
|||
Thanks for the swift reply. I knew there'd be a reason 😉
|
#49
|
|||
|
|||
How can you tell the difference between the rear shock towers? i brought a secondhand car that had two different ones but dont know which is what...
__________________
Trader feedback - http://www.oople.com/forums/showthread.php?t=85140 |
#50
|
|||
|
|||
I believe the A is narrower and has more of a 'v' shape, the C is wider and lower, the B is in the middle. The A mounts the top of the shock higher as the outer wishbone hole is parallel with the wishbone, the C lower, as the inner hole is under the wishbone (gull wing style). the B is in the middle so accomodates both.
|
#51
|
|||
|
|||
^^^ This ^^^
Next time I have all the towers in front of me I'll measure the outer hole spacing so you can tell which towers you have |
#52
|
|||
|
|||
Many thanks guys... Im sure i will have more questions when i get round to running the car abit more.
Richard what is you current high grip astro setup?
__________________
Trader feedback - http://www.oople.com/forums/showthread.php?t=85140 Last edited by Matt Butcher; 01-04-2015 at 09:34 AM. |
#53
|
|||
|
|||
I'll post a setup sheet with my current setup when I get chance (probably after Neo), I'm at the point where I only make little tweaks with mine now
Start with the Chadderton R3 setup but with the following changes... 2mm under the rear inner ballstud instead of 1mm Optional 'A' rear tower Less droop spacers in the rear shocks (I believe I'm on 2mm now, need to check) 5k rear diff oil (I'm finding the car feels 'right' when the front oil is about 2x the rear oil) Rich |
#54
|
|||
|
|||
Hi Richard. Can you confirm what droop spacers you are currently running front and rear? Many thanks.
__________________
Trader feedback - http://www.oople.com/forums/showthread.php?t=85140 |
#55
|
|||
|
|||
Will do, I'll be giving the cars some TLC before EPR this weekend so will confirm where I'm at with it right now
|
#56
|
|||
|
|||
Many thanks
__________________
Trader feedback - http://www.oople.com/forums/showthread.php?t=85140 |
#57
|
|||
|
|||
Reet, just to confirm I currently have 3mm of droop spacers in the front shocks and 2mm in the rear
|
#58
|
|||
|
|||
Many thanks. Most helpful.
__________________
Trader feedback - http://www.oople.com/forums/showthread.php?t=85140 |
#59
|
||||
|
||||
__________________
Answer RC team driver Formby models HB Racing D216 HB Racing D418 www.kandmacoustics.co.uk |
#60
|
||||
|
||||
My setup from today at round 2 of the Bury club championship
__________________
Answer RC team driver Formby models HB Racing D216 HB Racing D418 www.kandmacoustics.co.uk |
|
|