|
#1
|
||||
|
||||
Most up to date spring comparison chart
Seems to be quite a few new springs on the scene in various bores, which is the most up to date, comprehensive spring chart around at the minute?
|
#2
|
||||
|
||||
Try this
__________________
|
#3
|
||||
|
||||
James, Big Bores spring charts out there are not that accurate....little springs seem fine......I haven't forgotten that part
__________________
|
#4
|
||||
|
||||
Thanks Tony - shiny shiny
Thanks for the chart, but there are still a heck of a lot more springs out there than that, for example Durango, X-gear, schumacher, Tamiya etc |
#5
|
||||
|
||||
hope this one helps
__________________
Mattys the driver,my names carl
|
#6
|
||||
|
||||
Big Bore Spring Chart is now updated with Associated springs.
In addition, to compare BB shock, a chart with piston's dimension is now available. Bore and rod are to be confirmed. Piston's diameter are unknown to me so if you can provide accurate value feel free. Refer to this page (link) |
#7
|
||||
|
||||
no xray included? Could someone?
__________________
aka Ludo |
#8
|
||||
|
||||
Just multiply the X-ray rating by 5.71 and it will give it you in lb's
Spring rates, for comparison. Front Linear 1dot C=0.65 or 3.71lbs/inch Linear 2 dot C=0.72 or 4.11lbs/inch Progressive 2 stripes C=0.65-0.85 or 3.71-4.85lbs/inch Rear Linear 1dot C=0,35 or 1.99lbs/inch Linear 2dot C=0,40 or 2.28lbs/inch Linear 3dot C=0,45 or 2.57lbs/inch Progressive 2 stripes C=0,35-0,45 or 1.99-2.57lbs/inch
__________________
Luniemiester drives: AE B6.1 AE B6.1d AE B74 AE T6.1 AE SC6.1 Kits and parts supplied by: http://www.rccarshop.co.uk/[/size] My Feedback thread: http://www.oople.com/forums/showthre...945#post691945 |
|
|