|
#21
|
||||
|
||||
Chassis
Cheers J,
Now the nose coming........... |
#22
|
||||
|
||||
Nose RC10T.........
So for the nose.
The nose required for the front is the RC10T front nose plate. You will also need front RC10T Nose tubes and Front bulkhead. As you can see from the pictures the Gold standard nose also the same for the RC10 Stealth but in black. The RED truck nose and the far right is the Worlds RC10. Notice the triangle cut compared to the Gold/stealth. This was cut away at the request of Brian Kinwald for weight reduction................. Click to enlarge.......... |
#23
|
|||
|
|||
|
#24
|
||||
|
||||
Motor Plate.
Last but not least.
The motor plate. As you can see I have cut the rear of the motor plate before powder coating . Again fantastic finish to all parts and really pleased with the colour. WELL DONE MR MHEADLING........... Click to enlarge........... |
#25
|
||||
|
||||
Looks great now it's had a polish, going to be a other epic build
|
#26
|
||||
|
||||
ARM Comparison
Here are the comparisons of the front and rear wishbones. Just showing how much longer the NIX RPM arms are to the standard.This is why the truck nose plate and bulkhead are used and also the cutting of the rear chassis, to keep within the legal width............
Wishbones are approx 10mm WIDER than standard wishbones. Black are RC10 Worlds wishbones. White are NIX 91 Arms. Click to enlarge |
#27
|
||||
|
||||
The Build !!!!!!!
Had a few bits turn up, so have started the BUILD of the NIX 91 WoRldS. I WOULD LIKE TO THANK JAYST for the white front original WHITE bulkhead deal.
I have fitted the NIX rear hangers to the chassis. These fit with 8-32 rear screws and 4-40 at the front. I re-drilled and fitted 8-32 at the front of the hanger also. I have also fitted the front truck bulkhead to the truck nose plate. I have installed a new carbon RPM Worlds shock tower. The tower has holes for standard RC10 buggy front shacks, B2/B3 front shocks and truck front shocks. The white front bumper is the NIX version and is a excellent fit with no mods required. The NIX hangers and wishbones require drilling to the hinge pin holes and also the shock hole screws. I used a 3.2mm for this and is a perfect fit. I have gone for a set of original RC10 worlds blue screw kit. So it will be RED,WHITE and BLUE.............. Click to en-large. Last edited by xfactor; 25-09-2015 at 06:19 PM. |
#28
|
||||
|
||||
Quote:
So you are doing a Dutch tribute? |
#29
|
||||
|
||||
MmmmmmmmM NO ALMOST THOUGH .... |
#30
|
||||
|
||||
Nose fitted to Chassis
Pictures showing the truck nose fitted to the chassis. Also the RW steering posts fitted and carbon tower. All fitted with blue RC10 WORLDS screws.
Truck nose tubes required re-drilling for standard chassis length. This allows for quick change from long to standard chassis length. You could re-drill the chassis side but I went for the tubes. Click to en-large pics........... |
#31
|
||||
|
||||
__________________
atomic carbon & RED |
#32
|
||||
|
||||
What are the RW steering posts?
G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
#33
|
||||
|
||||
Hi Northy,
I have the RW Ball raced steering set for the RC10. I have fitted the tall thin steering screws with the metal bushing posts for the ball races to be fitted on. These also are the nose mounting screws at the front with the little blue 8-32 screw. If that makes sense..... |
#34
|
||||
|
||||
Rear NIX 91 w0RlDs Conversion ARMS installed.
Hi all,
Managed to do a little work on the NIX 91 worlds today after a un planed day out with the MRS...... So here are the rear arms with standard arm comparison.... CLICK TO ENLARGE.......... |
#35
|
||||
|
||||
Rear BULKHEAD MOD !!
So before fitting the rear bulkhead, the bulkhead needs to modified a little. Picture shows cutting of the rear bulkhead around the rear sides in front of the wishbone. This is needed to clear the wishbones............
Also fitted a original carbon rear tower with blue screws. CLICK TO ENLARGE.......... |
#36
|
||||
|
||||
Rear BULKHEAD fitted !!!
Bulkhead fitted to rear. You will see now the reason for the modification.....
The rear wishbones are more forward towards the bulkhead.... Blue screws also.... CLICK TO ENLARGE........... Last edited by xfactor; 04-10-2015 at 09:10 PM. |
#37
|
||||
|
||||
Thats it for now until the next un planed day out by the MRS......
|
#38
|
||||
|
||||
Send the mrs out on a shopping trip mate we need to see this built
Looking good so far
__________________
A rc car is not just for christmas, it's for life
|
#39
|
||||
|
||||
Cliff Letts MoO !! Paint
Hi all,
Been a little while, but have managed to paint the shell while waiting for parts to turn up... I have painted it in Cliff Letts MoO Style to go with the theme of the Buggy. Click to enlarge....... |
#40
|
||||
|
||||
NIX 91 w0rLds chassis (RED)
So managed to do a little more work on the NIX 91.
Pictures showing new servo mounts with blue screws and battery holder with red yokomo decals. Also W0rlDs gearbox and red motor plate ready for install again with blue screws.... CLICK TO ENLARGE.......... |
|
|