|
#41
|
||||
|
||||
We were all using the same mount which was a L shaped bit of plastic cut from a track marker I used a FTX truck body mount for the actual wing mount - but Mark was using some really nice looking wing mounts from Maverick
|
#42
|
|||
|
|||
IF ya need any wings or even a buggy shell, come see me or Dan on uk-microrc.
We have a section under Phat Bodies, there's pics on there of the 2 wings and a 4wd "Dudu" shell for the Blaze/ST that could well fit the Xray, and a 2wd "Dufus" shell that fits the Tamtech GB-01 and extended Mini t chassis. HTH Si. |
#43
|
||||
|
||||
Thanks Mr.Speedy, the 'BENDER' wing was the one I used from the looks of it - it was ace. I'm not a fan of the Blaze type shells if I'm honest, though they are much nicer than any truck in existence! So I'm looking at fitting a JConcepts miniBJ4 Illuzion - I heard it can be done.
|
#44
|
|||
|
|||
Actually, the Mini BJ4 will fit the M18T, not the M18T pro. The Pro is 16mm longer, so the body isn't long enough.
__________________
*Have a question on the M18/T line of vehicles? Check the (unofficial) FAQ. *Need help finding an Xray supplier? Check the dealer/distributor database. |
#46
|
|||
|
|||
The Dudu shell is longer than the RC18 buggy shell
|
#47
|
|||
|
|||
Yea, but its also not proportioned to the M18T. It would have these wide sides that just stuck out into space where all dust and dirt could be sucked right in underneath. You would need something closer to a narrower 1/10th 4wd buggy.
So speaking of which, I know I and at least 3 other people here in the US would be interested in a narrow form fitting buggy body that fit the Pro, Mr. Speedy (especially if you offered a lexan underpan as well to velcro the top to). (I'm ignorant if you are Phat bodies, or just know them, sorry if the former).
__________________
*Have a question on the M18/T line of vehicles? Check the (unofficial) FAQ. *Need help finding an Xray supplier? Check the dealer/distributor database. |
#48
|
|||
|
|||
He is Phat Bodies
__________________
Previously: BRCA Micro Section Chairman. BRCA Micro National Champion. Currently: JQ fan. Bellend. Forums are better than Facebook groups |
#49
|
||||
|
||||
Just seen some pics from chesterfield
Loving the wing mount Jimmy
__________________
Schumacher • Phat Bodies Mendip R/C Raceway - Offroad Racing in South-West WORM-Racing - GT12 Racing in the South-West |
#50
|
|||
|
|||
Here is my completed M18T Pro (for the most part).
Body is pretty fugly, but I had to give a call out since I did get some oOple stickers on it (almost felt like a shame doing so). You can see my wing mounting system, and smaller servo as well. For those who decide on the flight power lipos, they are thicker, so you will have to add shims under the battery retention posts. Otherwise they drop right in. It has Electronics:
(see the picture of the glowing bits ) Hop Ups:
__________________
*Have a question on the M18/T line of vehicles? Check the (unofficial) FAQ. *Need help finding an Xray supplier? Check the dealer/distributor database. |
#51
|
|||
|
|||
Fitted FlightPower 1800 25c lipo with little modification. Drilled new holes for the battery retainer toward the front and slapped up a battery retaining plate.
http://i140.photobucket.com/albums/r...e/IMG_0450.jpg http://i140.photobucket.com/albums/r...e/IMG_0451.jpg http://i140.photobucket.com/albums/r...e/IMG_0452.jpg My standard M18B http://i140.photobucket.com/albums/r...e/IMG_0015.jpg http://i140.photobucket.com/albums/r...e/IMG_5391.jpg http://i140.photobucket.com/albums/r...e/IMG_5396.jpg http://i140.photobucket.com/albums/r...e/IMG_5393.jpg Cheers |
#52
|
|||
|
|||
Hey Julius. You must get plenty of runtime with that pack!
On your B, I noticed your using the Anderson front tires and the M18T rears. Which are slightly different diameters. You can use the narrow front tires from the RC18T by cutting of the outer lip of the inside of the M18T rim. Then using the now exposed inner lip of the inside as the new outer. Thats what Zack did for the nats for his narrows.
__________________
*Have a question on the M18/T line of vehicles? Check the (unofficial) FAQ. *Need help finding an Xray supplier? Check the dealer/distributor database. |
#53
|
|||
|
|||
Mini, yeh the 1800 i've had 20minute runs using the Tekin 6800. Thats when i stopped, not from the batt hitting voltage cutoff. Didnt want to risk going further.
Will have to give the 18B tires a try, thanks. I used the Vendetta tires and rims coz I had some laying around. The rims are larger diameter than stock but with tires mounted the diameters are within 1mm difference and didnt have a detrimental affect on handling. Want to try foams at some stage. My track is made of lots of 600mm square foam tiles like the RCP stuff. Anyone now if foam tires work on this stuff. Cheers |
#54
|
||||
|
||||
Skipped my TP chassi and installed a Pro one...did som changes to diff,limiters in rear shocks, and inner hole on rear shocks...what a rocket...love it!!
Smoked my rear alu hub...nothing else broke...just alu..sick |
#56
|
||||
|
||||
New setup for the truck and result from my first race ever with the 1/18 cars
As you can see in the forum before this one, Ottoswe was the big winner @ Halmstad Indörrs 1/18 OR cup 1/11-2009 he is so fast that it is almost unbelievable. Track Type Description: Smooth,technical and fast +Front+ Shocks: Alu Shock Oils: 1500w Pistons: 2 Spring: Yellow hard Preload: 2mm Internal Droop Spacers: 5mm Shock Angles: (alu tower,arms just under level) Shock angle bottom arms: Outer Shock angle top arms: Outer Toe In/Out: 1 out Swaybars: Sway Bars: On Sway Bar MM thickness: 1.5mm Tires: Foam Compound/Type: UFRA 42 Dimensions: 55mm/18mm Traction compound: Carpetjack CA: Yes edge Micell: front diff hard +Rear+ Shocks: Alu Shock Oils: 1000w Pistons: 2 Spring: Black medium Preload: 5mm Internal Droop Spacers: 7mm Shock Angles: (Alu tower) Shock angle bottom arms: Outer Shock angle top arms: 3rd from top Toe In: 1 in Swaybars: Yes Sway Bars: On Sway Bar MM thickness: Stock Tires: Foam Compound/Type: UFRA 42 Dimensions: 55mm/23mm Traction compound:Carpetjack CA: Edge Micell: middle diff +Chassis+ Weight Balance or layout: Motor,Esc and servo on rightside, Rx on front left Micell: Xray M18T Pro +Electronics+ Motor:eZrun 7800 rpm/v Gearing:Stock/16T Specifics Notes:Alu rear and front carriers - NT hex - Alu towers - XXX4 wing mount. Using M18T Pro parts on the truck.Stock lid, Tamiya frog ving I qualified to 1/4 final and bumped up to Semi, that was something that i did´nt expected at all.. finished 16th of over 56 starting |
#57
|
||||
|
||||
Made my on sheet, klick on pic on my blogg and you´l see it in full size.
http://rc-xtreme.blogspot.com/ |
|
|