|
#1541
|
||||
|
||||
Need your setup Sparky, what motor, timing on motor and esc setup.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#1542
|
|||
|
|||
sorry
gm 13.5 FDR 6.67 boost was about 45 turbo max |
#1543
|
||||
|
||||
How much timing on your motor?
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#1544
|
|||
|
|||
|
#1545
|
||||
|
||||
That is very possible. And yes batteries that cannot sustain the requirement will eventually ruin something. I'd suggest not doing that any longer.
__________________
Tekin Team Manager |
#1546
|
||||
|
||||
Sounds like way to much total timing to me, need to turn things down a little, that gives you a total of 95' timing, surprised you haven't melted the motor!!
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#1547
|
|||
|
|||
Thanks for the reply. I have tried an alternative battery and seems to have solved the problem with the stuttering.
|
#1548
|
|||
|
|||
Quote:
Out of interest what is the overall limit I should be aiming for in terms of timing? And how do you work out what the constant and burst current is on the speedo? Thanks again. |
#1549
|
||||
|
||||
Don't worry, your ESC can delver more than your motor can accept.
I always worked on a limit of between 50 and 65' total timing maximum, you got to experiment with differing amounts to suit your driving style, I found that a low timing on the motor helped with punch off the start line and using the ESC to recoup the speed, last time I did a 13.5 it was 10' motor timing 40' boost timing 12' Turbo End RPM 20,000 Start RPM around the 3,000rpm Turbo Ramp 2 Delay of 0.15
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#1550
|
|||
|
|||
Quote:
|
#1551
|
||||
|
||||
Don't be afraid to turn the limiter down to 85%, this will help reduce some of the heat build up and resist the temptation to turn everything to the max to.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#1552
|
|||
|
|||
I take it this is the current limit setting? I will bare that in mind aswell.
|
#1553
|
||||
|
||||
Need Tekin Repairs
Hi ,
I have two Tekin speedos..a RS and a RS pro..one was shorted,the other I bought turned out to be a dud ,where do I send them for repair.. Regards Tony.. |
#1554
|
||||
|
||||
RC Disco http://www.rcdisco.com/ give them a call
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#1555
|
||||
|
||||
__________________
Tekin Team Manager |
#1556
|
||||
|
||||
Hi Randy
Is there a noticeble difference in smoothness between the rx8 an the ge2 version or is it mainly for the updated bec an datalogging?
__________________
Tekno RC EB48.2 Tekin Savox Tekno RC EB48 Tekin Futuba Desc410r Tekin Savox |
#1557
|
||||
|
||||
The Rx8 Gen benefits from the new hardware/software package as the RS Gen2 line does. So yes it's smoother, runs a bit cooler esc wise,etc.
__________________
Tekin Team Manager |
#1558
|
||||
|
||||
Rx8 probs
Hi peeps,
My rx8 has started doing some strange things. All of a sudden during a race it lost all power and started cogging. I took the sensor lead out and still the same. I changed the sensor lead.... Still the same. I changed motors...... Still the same. I re-saved the settings again and again and....... Still the same!! There was one difference after re-saving the settings - the fault code displaying on the speedo is wrong motor type??? This speedo has been ultra reliable for the past year or so, without skipping a beat, so seems strange to just pack up on me now!! Any help gratefully received!! Jay |
#1559
|
||||
|
||||
Wont Arm
Hi all,My Tekin RS Pro will chime when caliberated but wont arm,also if when I put my ear up close to the unit is makes a small pulsating noise every second as if it is ticking over.The display shows the first two lightS and last two lights on the display..I have tried many neutral widths..It has the latest software in it..also blinkey mode set..Anyone HELP please..I dont want to give up on a fab ESC..tHANKS IN ADVANCE..
|
#1560
|
||||
|
||||
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
|
|