Silverstone set up.

[Ross]

Is anyone willing to share a currant set up for silverstone with shocks on the rear for a KF2

Cheers
Ross

[The_chosen_one]

Give this a go?



worked pretty well for me on saturday

[Adam F]

^

Pretty much same as above for me, but on small bores now with 2 degree anti squat..

[Ross]

Originally Posted by The_chosen_one

Give this a go?

worked pretty well for me on saturday

Originally Posted by Adam F

^

Pretty much same as above for me, but on small bores now with 2 degree anti squat..

Thank guys, all set up as above

[Ross]

Anyone know the difference between SV2 and KF2 front arms, are the SV2 arms shorter ?

SV2 number U3713
KF2 number U4095

[Npdp72]

Yep, they are shorter, resulting in a narrower front track width.

[Ross]

Originally Posted by Npdp72

Yep, they are shorter, resulting in a narrower front track width.

Thought so, thanks Nigel

[Adam F]

Check your diff too Ross.. Mine was totally empty with only blue fluff inside :/

[Ross]

Originally Posted by Adam F

Check your diff too Ross.. Mine was totally empty with only blue fluff inside :/

I'm rebuilding it over the weekend so will check.

Cheers mate

[Ross]

Shocks had the blue gear behind the lower cap and around the bushes and between the out drives and bearings on the diff

[Adam F]

Mine too, but belt was dry as it was leaking from the outdrives...

No wonder its been a bit of a handful!!

[Ross]

Originally Posted by Adam F

Mine too, but belt was dry as it was leaking from the outdrives...

No wonder its been a bit of a handful!!

Haha same as that