|
#1
|
||||
|
||||
more pred info required
bit info required please pred gurus
mitchs xk 98 is almost ready to be thrash tested again on re building diff I noticed a bearing missing inside diff !! there is a recess in one half of the diff to allow a bearing to seat and support shaft from other half of diff the manual we have does not carry a spares parts list or assembly instructions .does anybody have any idea what size we need thanks guys see you at iconic (of course we will have a sensible reserve option should the pred decide to destroy itself after one run!!) dave n mitch fid |
#2
|
|||
|
|||
Try dyna he knows all things pred
|
#3
|
||||
|
||||
Internal diff bearing is a 7x4.
Depending on which diffs you have, the earlier ones had two bearings, later ones only had one. Xk98 should have one from memory. |
#4
|
||||
|
||||
cheers chief
with the help of a another pred freak we have converted to b44.1 bevel and pinion gears we have a plain bush supporting large central hole in bevel gear but no bearing in recess in diff half this should help regards dave |
Thread Tools | |
Display Modes | |
|
|