Go Back   oOple.com Forums > General > Electrics

Reply
 
Thread Tools Display Modes
  #1  
Old 04-10-2015
Mark240973 Mark240973 is offline
New Member
 
Join Date: Sep 2015
Location: Gloucester
Posts: 26
Default Flow setup for 13.5 boosted

Hi,

I am after some advice on speedo set up for a 13.5t boosted touring car.
I have a Flow works competition speedo with the std firmware on it and currently run....indoors on carpet. 13.5 Gforce (black) motor on 40 actual Timing

I am having problems with getting rear traction with the car and wondered if its purely a mech set up problem or perhaps the speedo settings and punch settings are way too aggresive?

I am wondering if I should turn down the boost angle? or boost itself?

Any thoughts?

settings are 0/3/0/6/8/10/0
Reply With Quote
  #2  
Old 04-10-2015
beale's Avatar
beale beale is offline
Senior Member
 
Join Date: Apr 2011
Posts: 371
Default

What is your FDR I run Gforce motors but in blinky also with 40deg timing, this looks high for boosted would say 25ish 6.5 -7 FDR and bring your boost/turbo in slowly, for rear traction when I have trouble I tend to only additive the rears reduce steering EPA as much as can get away with reduce rear droop and stand rear shocks up before looking at the front.
Reply With Quote
  #3  
Old 04-10-2015
Mark240973 Mark240973 is offline
New Member
 
Join Date: Sep 2015
Location: Gloucester
Posts: 26
Default

85/21 what ever FDR that is 7.29 probably a bit much for indoors! so 25deg (No 5) boost and 2.5% (No 6) boostangle?

Is it worth me upgrading the firmware yet bearing in mind its only my second week at touring cars after 10 years away.
Reply With Quote
  #4  
Old 04-10-2015
beale's Avatar
beale beale is offline
Senior Member
 
Join Date: Apr 2011
Posts: 371
Default

They are a good tourqy motor so with a high FDR and 40* it will accelerate quickly but reducing them for boosted should settle it down
Reply With Quote
  #5  
Old 06-10-2015
Mark240973 Mark240973 is offline
New Member
 
Join Date: Sep 2015
Location: Gloucester
Posts: 26
Default

anyone else got any advice or settings?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:29 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com