|
#1
|
||||
|
||||
mardave v10
hi guys thought id post this as ive just dropped on an rtr mardave v10 flebay.
question is spares?are mardave starting to produce them with the release of the v10gt?
__________________
|
#2
|
|||
|
|||
If u mean the original v10 I'd. Also be interested to know the same
|
#3
|
||||
|
||||
yes its the original ive just bought,even has the original speedo in it.
also would like a copy of the manual if anyone can scan and email me 1?
__________________
|
#4
|
||||
|
||||
Hi guys I have quite afew bits for the old v10 as I still run mine occasionally. Have the manual also somewhere so will try and dig it out for you and scan it in if I can find it in my organized chaos lol
|
#5
|
||||
|
||||
Do you have a link?
I have a v10, be good to see what you have got on it.
__________________
http://www.thercracer.com/ |
#6
|
||||
|
||||
Quote:
if you decide to sell some spares let me know i might have a few bits off you
__________________
|
#7
|
||||
|
||||
Sorry for the delay guys I have been abit busy with work and sorting my v12 out for my midweek club.
This is a video of my V10 going round my old club before we moved to a bigger hall. The car is running the original v10 soft tyres all round, 27t stock on 7.4v cells and is totally stock except for the anodised blue chassis that I bought from mardave when Wes was running it. http://www.youtube.com/watch?v=Z6ZzEtJYAGE http://i1182.photobucket.com/albums/...db9jpgfile.jpg This is with the shell off but the wheels on it are just for transporting it around so the foams dont get flat spots. http://i1182.photobucket.com/albums/...ampo84/282.jpg I have included the image direct links as the HTML doesnt seem to want to work. |
#8
|
||||
|
||||
nice cant wait to get mine, i emailed dave from mardave yesterday hes kindly sending me a manual for the v10.
cant find any info on a v10 apart from v10 banger body mounts. is the rear axle wider then a v12? and the wishbones are they smaller on the v12?
__________________
|
#9
|
||||
|
||||
Yes the V10 has a wider rear axle and the wishbones are the same just abit larger.
The diff is the same unit and outdrive as the v12 diff which came from the v10. You can use the v12 wishbones by making a butterfly that mounts on top of the chassis but is wider with the correct hole spacing but you lose abit of front ride height but it depends how thick you make the butterfly. |
#10
|
||||
|
||||
ok cheers ill be keeping an eye out for spares and prob contact dave to see if he can supply any too
__________________
|
#11
|
||||
|
||||
Mardave dont have axles etc, I was after spares for ages.
They are meant to be re-releasing the V10 though. So hopefully we will get some spares. I would think they might go for a FRP chassis, and new suspension front plate like the CE edition. Nice blue chassis, Mine is the std yellow one. I have foams on mine, Where did you get the rubber wheels from?
__________________
http://www.thercracer.com/ |
#12
|
||||
|
||||
The rubber wheels are the original wheels but with rubber tyres glued on and balanced.
I got a shed load of wheels from Lee when he sold mardave as he had boxes of v10 spares and asked if I wanted to take them off his hands which I did : ) I then ebayed alot of the stuff with my other v10 chassis I had which was a red anodised chassis with around 40 sets of wheels and tyres alot of body mounts and wishbones. Got very little for it all really but keep running out of space for my gear. |
#13
|
||||
|
||||
chris from mardave has very kindly sent out a manual for me for the v10 so as soon as i find the driver for my printer on line ill up load a copy on here
__________________
|
#14
|
||||
|
||||
Cheers much appreciated
__________________
http://www.thercracer.com/ |
#15
|
||||
|
||||
so my mardave v10 came yesterday and my what a mess it was dont think the guy had ever cleaned it,it took abit of cleaning and sand paper to get the old glue off the chassis and the paint off the under side but it all came off.
the rear diff is nice and smooth and has bearings on the rear axle (which is nice and straight) no broken parts either thank god. just fitted a shell i bought off another forum which is 200mm wide think a 190mm would be more suitable though. also the manual i promised will be put up as soon as i find my printer cable ive tryed downloading the software for my printer but didnt have any luck with it. pics will be added shortly when my camera has charged
__________________
|
#16
|
||||
|
||||
pic's on the v10 cleaned up ready for tyres and electrics also need to make a front bumper for it.
question though which tyres fit i know i can use some standard tc foams on the front but what about the rear?
__________________
|
|
|