Stock Buggy Class

[Robbiejuk]

Originally Posted by siddus74

Where would one get venoms from? and what compound is working for you Dave?

Scott.

Get them from Dave in White compound.

[Dave Dodd]

Yeah have the venom whites in stock.

[cunawarit]

OK guys, I've decided to give this a go with a basic brushed sealed can setup to see how it goes. Will start out with a sealed can 23 or 21 motor... Equivalent to a Tamiya black can I guess.

[dicky14]

Hi Scott ive got a set of mounted whites for a tm2 if you want to borrow on friday

[msmith105e]

suppose i might drag the electrics out of my 'dave and give it a go

[cunawarit]

I'll aim to give it a go this Friday sans-transponder... Need to change the settings on the Losi for the Venons and anyway, my PT is deep inside the TL01 chassis under all my electronics... Points don't matter on the last race of the series anyway

I can't wait to do off-road at sensible speeds.

[siddus74]

Thanks Dickie ... not sure I can make it this week .. but surely in the new year. Ta

Scott

[Dave Dodd]

Brilliant, be good to get a few more going round.

[siddus74]

Dickie may be able to make it. will only have a 21.5 installed if I can but if you bring those tyres just incase that would be great ... I presume they will fit a tm2?

Scott

[emtee]

Hi y'all.. wish I lived a bit closer to you guys, this sounds like it could be a lot of fun!!! Keep the forum posted as to how things went.. I love stock(ish..) heats... in any car!!

[cunawarit]

Turns out I can't use a sealed can motor on the Losi, it won't fit. I've fitted the slowest rebuildable motor I have... a 15T! Will have to do for today, not going to run a transponder anyway.

Shouldn't be too fast anyway, the brushes are over 10 years old

[siddus74]

Can any body do me a set of the rear soft white venoms for tonight? I have some rims :-)

Scott.

[The Doctor]

Gui's having my set of Whites. I have some Yellows and Silvers if you want to try them, but the whites are better.

[siddus74]

Ive got some lined up hopefully (thanks to Richard), but all I could find to power my buggy was 1 21.5 so I think its going to be really, really slow ...

Ill run it around the track and make my decision based on that ...

Scott.

[Dave Dodd]

Anyone else wishing to give stock buggy a go. It's not an official class yet so there is no motor ruling just venom white slicks. I would suggest 13.5 or similar with zero timing on esc or even a brushed setup.
It's fun, teaches throttle control and really cheap on tires, I'm using practically slick low pro cut staggers on the front(not that there is much left) additives are not essential but do help in the early stages.
As does using a slightly tighter diff setting otherwise you may spin up the inside wheel in the corners (even with a slower motor)

[cunawarit]

I can attest that it is lots of fun and more of a challenge than using pins.

The lil 12T motor was kind of ballistic down the main straight, next time I'll remember to set it up with zero timing. I'm enjoying the Mardave for now, but this series I'll do a few rounds of stock buggy... The Losi handled the low grip tyres better than I thought it would