|
#21
|
||||
|
||||
I'm running in mine a KO 2363 servo, KO 302F reciever and a Quantum Comp 2 speedo seems to run great for me.
|
#22
|
|||
|
|||
LRP QC2 ESC
Air 94361 Servo Spektrum Reedy 7 x 2 --- OR ---- (depending on conditions) LRP SPHERE COMP. Air 94361 Servo NEO 2 Star Spektrum
__________________
Simply put - too much stuff to list. |
#23
|
||||
|
||||
Quote:
|
#24
|
||||
|
||||
I'm not that good at driving... a 5.5 or 6.5 will be more than enough for me. Besides if I get an X6 for the 2wd competitions next year (which I'm seriosuly considering) then I'll need two brushless setups... I'm buggered if I'm swapping the motors and speedos backward and forward between cars all the time...
-Steve
__________________
Name: Steve Description: Hairy Past: Schumacker Fireblade Evo Present: Tamiya DF-03 Future: Tamiya TRF501X |
#25
|
||||
|
||||
Finished
Going to a trophy race on Jan. 6 2007 will tell you guys what i think of the car, as it sits the shocks and springs feel a little on the soft side but i will try it first before changing rates and whts. Picture 382.jpg
Picture 386.jpg |
#26
|
|||
|
|||
Build is complete. Just started the on the body.
I like the look of the body, but .......... What were they thinking when designing a body with such weird shaped windows and NOT including window masks. |
#27
|
|||
|
|||
It is crazy not supplying masks. I guess Jimmy will make some for his review car and then these will be for sale. I still dont like the shell, why could they not make it a classic shape like the ZX5? But I guess there will be no mistaking what your driving...
|
#28
|
|||
|
|||
Not including window masks must be part of the weird sence of homour of the japanese :
"Let's design an impossible window shape and look at all those dumb white boys mess around with masking tape" BTW, I love the body shape. It looks mean and fast. |
#29
|
||||
|
||||
Stop moaning and get on with it, lol, or you could pay for someone to spray it for you.....
As for window masks, they are nowt more than a pain in the butt!!!
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#30
|
||||
|
||||
Below is a picture of my car, now painted.
I thought masking the windows was easy, it was trying to mask other areas of the body that was hard Dont judge it too harshly, I hate painting
__________________
Schumacher Cougar SV-Durango Dex410-Top Photon |
#31
|
||||
|
||||
Looks good to me, Bender!
I collected my kit on Thursday - started building yesterday after a bit of prep with the carbon bits. I have some of the alloy TA05 outdrives on order to try, so I'm hanging on for those before I go much further. Has anyone else noticed the spur gear doesn't appear to run perfectly true? Is this just a combination of the friction pads needing time to bed in, i.e. flatten, and that it's currently not meshed with a pinion gear? Cheers, Andy.
__________________
Last edited by Dunc; 01-01-2007 at 01:20 PM. |
#32
|
|||
|
|||
looks cool! maybe the shell will grow on me. You might want to put some tyres on otherwise it will slip on your kitchen floor..
N |
#33
|
||||
|
||||
Ran Mine Yesterday down my local club and bent a shock shaft 1st time out Pish Flaps! ope I can get spares
Does seem a bit soft though, running 40wt oil in front and 35 in rear, anyone else found any springs that fit???? Have also raised the height of the front ball studs and shortered the camber links front and rear to stop it pitching and rolling so much! Pinions are a bit of an arse too, think I need some of those spangly corally ones! |
#34
|
||||
|
||||
Associated springs should be a direct fit. I bought some as I've no idea what rate the kit springs are, plus I don't think Tamiya have any alternatives currently available.
__________________
|
#35
|
|||
|
|||
Hi,
I am not sure if it is so but I have heard that the associated unobtanium shafts will fit so it might be worth checking this out. I am not sure if it was the fronts or rears that they did this with though. I should be receiving my 501 kit today or tommorow so I will check it against my B4 and let you know |
#36
|
||||
|
||||
I was thinking about Associated unobtanium shafts, but I'm a little worried that although in principle they may fit, the mix of metric/imperial will allow for slight leakage due to an improper seal.
Does anyone know how Losi and Associated's system works in terms of the shaft length - is it related to the stroke? The longest Losi do, for example, is 1.2" but surely the shaft itself is longer than this (tip to tip, including thread)? I'm worried about the strength of the steel (aren't they?) turnbuckles and shock shafts in the TRF501X kit, so I was going to give the titanium equivalents from the MR4-BX a try. They are slightly different lengths though; shouldn't be a problem with the turnbuckles, and hopefully won't adversely affect the handling regarding the shock shafts. I'm pretty sure they'll be a direct fit, I'll check first though.
__________________
|
#37
|
||||
|
||||
Associated shock shafts won't fit, tried these when I bent mine! Tamiya shock shaft diameter is 3mm and Associated is 3.15mm
|
#38
|
|||
|
|||
I posted a setup for the 501 on my blog a few days ago that I scanned from the latest issue of RC Magazine (japan) .
see here: http://kentech.blogs.se
__________________
http://kentech.blogs.se |
#39
|
||||
|
||||
Thanks
Strange they list the shock pistons as #1 and #2 but the pistons in the kit are numbered #3 #4 and #5 , go figure?
|
#40
|
||||
|
||||
maybe running AE shocks and pistons ? The ae pistons don't fit the 501X shocks unless you give then a bit of sanding so probably not using them in the kit shocks.
OR perhaps they are referring to the pistons by their AE numbers, so the largest holes would be piston 1, smallest piston3 I have mine built with piston 1 rear and piston 3 front - same as my BJ4 worlds |
|
|