|
#1
|
||||
|
||||
1s lipo gearing
what size spurs and pinion`s are people running on there lipo powered cars? 48dp
are there any useful link`s that someone could guide me to. thanks
__________________
teh-r31 drifters, exo terra |
#2
|
|||
|
|||
I use a spur that gives good ground clearance as the rear tyres get real small and I choose a pinion depending on the track, small tight track, small pinion, big wide open trac, big pinion. We build a different track every week and I have pinions from 18 to 26.
Best to find someone in your club with a similar motor and start with their set up.
__________________
X6 Squared. No2 car. Novak. Savox. X6 Squared. No1 car. RS Pro, LRP. SC10 4x4 FT. Toro 120A. Tenshock. Savox. SC10. Stock spec ESC & motor. KO Propo. Powered by Nanotechnology. |
#3
|
||||
|
||||
Oval or Circuit?
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
#4
|
||||
|
||||
everyone use`s 32dp at out club that`s why i`m asking on here.
i have a rollout chart but it`s for a brushed motor and when i use it my car slower and can`t work it out. i have brushless fitted in 2 car`s for both oval and circuit. circuit car is fitted with a novak havok 1s esc and speed pasion 13.5t motor. oval car is fitted with a fusion exceed esc and 13.5t motor and a booster so i can use 1s.
__________________
teh-r31 drifters, exo terra |
#5
|
||||
|
||||
Medium carpet indoor track I'm on 70mmpr + or - 1 or 2 mm depending on track layout.
1s/13.5 full mechanical timing, 'Blinky Mode' esc. Currently on 70.5mmpr 48dp = 31/70 on 50.7mm rear foams can't help with oval, sorry video shows WGT10 but we use the same layout for all classes
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
Thread Tools | |
Display Modes | |
|
|