Go Back   oOple.com Forums > Trade Room > For Sale

 
 
Thread Tools Display Modes
  #1  
Old 24-06-2009
electric electric is offline
Member
 
Join Date: Aug 2008
Location: reading, berkshire
Posts: 138
Send a message via MSN to electric
Default TC4, CRT, lipos wheels + tyres radio gear and lots more

hi guys loads for sale as i need a few more lipos for my CRT and 8ight:
tower pro servos. one is like new having only been used once in my tc4 the other has been used maybe 5 times in my CRT - £8 each including original horns + fixings

True RC 3200mah 15C/20C lipo with balance lead converter for jst-xh chargers such as the B6. £20

12V lead acid charger - £4

TC4 with lots of spares 2 bodyshells and a set of slick wheels and tyres not the carpet dragons pictured - £85 for the car and one set of wheels and tyres or £125 with the box of tyres










tekin redline 362 motor - £25
__________________
cars:
vintage 1988 tamiya grasshopper
Brushless CRT.5 - Mamba max - medusa 36-50-4800 motor - ftx 5K lipos
Brushless CRT - Mamba monster - Neu motor - RCPD conversion kit {for sale}
Ebay items : http://shop.ebay.co.uk/merchant/terzo53
  #2  
Old 24-06-2009
electric electric is offline
Member
 
Join Date: Aug 2008
Location: reading, berkshire
Posts: 138
Send a message via MSN to electric
Default

feagio 9xl clone motor in good condition - £25 without the RC-Monster heatsink or £40 with it

brand new spektrum receiver which i was going to use in my rustler but i have enough used receivers now - £45
a load of crt parts and hopups well over a car's worth of parts so if you need something let me know



full nitro setup including linkages, engine mount fuel tank e.t.c

thanks for looking
richard
__________________
cars:
vintage 1988 tamiya grasshopper
Brushless CRT.5 - Mamba max - medusa 36-50-4800 motor - ftx 5K lipos
Brushless CRT - Mamba monster - Neu motor - RCPD conversion kit {for sale}
Ebay items : http://shop.ebay.co.uk/merchant/terzo53
  #3  
Old 09-07-2009
electric electric is offline
Member
 
Join Date: Aug 2008
Location: reading, berkshire
Posts: 138
Send a message via MSN to electric
Default

futaba 2pl is now sold
i am away from friday (09/07) to 25/07 so won't be able to respond to PM's
__________________
cars:
vintage 1988 tamiya grasshopper
Brushless CRT.5 - Mamba max - medusa 36-50-4800 motor - ftx 5K lipos
Brushless CRT - Mamba monster - Neu motor - RCPD conversion kit {for sale}
Ebay items : http://shop.ebay.co.uk/merchant/terzo53
  #4  
Old 02-09-2009
electric electric is offline
Member
 
Join Date: Aug 2008
Location: reading, berkshire
Posts: 138
Send a message via MSN to electric
Default

price drops:
£10 for the pair of towerpro servos
£10 for the lipo (it has puffed a little but fine so long as you don't push it too hard)
£65 for the TC4/£85 with tyres and wheels
£25 for the complete box of tyres and wheels
£10 for the carpet dragons
£15 for the tekin motor
£15/£30 for the 9xl
New spektrum receiver £40
__________________
cars:
vintage 1988 tamiya grasshopper
Brushless CRT.5 - Mamba max - medusa 36-50-4800 motor - ftx 5K lipos
Brushless CRT - Mamba monster - Neu motor - RCPD conversion kit {for sale}
Ebay items : http://shop.ebay.co.uk/merchant/terzo53
  #5  
Old 02-09-2009
electric electric is offline
Member
 
Join Date: Aug 2008
Location: reading, berkshire
Posts: 138
Send a message via MSN to electric
Default

hi,
i also have a rustler VXL up for sale
it comes with a brand new chassis, front bulkhead and upper chassis (still in packaging not fitted as i haven't had time to fit them yet)
the original chassis, bulkhead and upper chassis cracked because the bulkhead 1st broke i didn't realise and that put alot of strain on the rest...
it has RPM - front and rear shock towers, front and rear arms, front hubs and front castor blocks as well as a bumper.
it has a bent integy wheelie bar that could be bent back and integy rear hubs
it comes with the worn and cracked stock rear wheels on stock tyres
the anaconda and alias black wheels front and back in good condition + a spare nip wheel
the transmission is fine but could perhaps do with a bit more grease as it does let a bit too much power go
the stock front shocks are fine but just need topping up with oil but the rears are a little bent
i have a set of 1/8th buggy shocks on the rear at the moment and they are super strong so i have just left them on there.
there are 4 buggy shocks, the shorter ones are on the back of the rustler and the longer ones aren't being used
there are quite a few sets of springs for the buggy shocks too (i think 2-3 full sets including the ones on the shocks)
i was using 1/10 buggy shocks on the front (the rear buggy shocks on the front of the rustler if that makes sense)
there are a full set and again there are more than 1 set of springs. if you want to do speed runs you can fit these shocks as it lowers the car alot and keeps it more stable
i also have a lightly used set of 4 dirt hawgs on hpi red wheels
the bodyshell is a beaten up but with spacers e.t.c you can get it to sit tight...
pictures:



i was after around the £150 mark with rustler VXL motor (i also have a losi xcelrion sensorless motor and esc i could include for an extra £50)

Losi Excelrion brushless esc and motor 4800kv average condition as the fan is missing a few blades and there are the usual wear marks but for how cheap it is you can't complain - £50

thanks richard
__________________
cars:
vintage 1988 tamiya grasshopper
Brushless CRT.5 - Mamba max - medusa 36-50-4800 motor - ftx 5K lipos
Brushless CRT - Mamba monster - Neu motor - RCPD conversion kit {for sale}
Ebay items : http://shop.ebay.co.uk/merchant/terzo53
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:27 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com