|
#1
|
||||
|
||||
Silverblack, the alloy Javelin
After seeing what a customer of ours did to his RC10 after adding one of our RC10 cages I am seriously toying with the idea of a fully made(or mostly made) alloy Javelin, hence; The Silverblack... here comes the obsesive spending again
My plan is to use an already made Javelin aluminum rollcage I have that I was planning to use on my Green Monster. The problem is that I am more in favor of a really nice metallic green coat rather than to green anodize the cage. So in order not to coat one of the only two aluminum Javelin rollcages in existance that I've made I decided to use one of our standard stainless steel for the Green Monster and coat it metallic green and use the aluminum one for the alloy build. The plan: I am planning on using the aluminum rollcage(obviously) and polish it. I will also make unique factory stock style(not option house) aluminum side guards and buy or make the following; aluminum top deck, deck support, arms, new polished shocks(probabbly Integy), fabricated or CNC'd aluminum bumber, bumper brace, alloy wing, linkages, hubs, screws, wheels and spindles. What I am still debating on is the fabrication of CNC transmission cases, chain cover, steering bellcrank and other parts alike, so that's why it will be named Siverblack since it will not be an entirely aluminum made Javelin. I also have the following questions; Will the Laser ZX5 spindles work on the Optima hubs? Did Kyosho ever made shiny dogbones and shafts or are there any that will fit? More pictures with the build later, this one for sure is going to be a slow one.... |
#2
|
||||
|
||||
Looking forward to seeing this unfold.
I have a set of vintage alloy wishbones that may be perfect for your project If you have access to a CNC lathe you could make some really cool parts, like maybe alloy rear hubs? I love polished alloy, I did all the polishing myself on my other project below
__________________
___________________ Maxxum FF Ultima Pro Turbo Optima Mid SE Turbo Optima Mid SP Optima Mid Custom Special Lazer ZX Lazer ZX-R Lazer ZX-S |
#3
|
||||
|
||||
No wonder you AKA name is HKS_TRD!!!! That 2JZ is sweet!!!!
Supra I guess? Soarer or some nasty build? You just gave me candy to my sweet tooth, I am too an engine/turbo builder, I've made one or two Not as beautiful as yours, but very deadly, this is my street legal, 3000 pounder 1989 autocross Trans Am GTA. It has a turbocharged 5.7L/350ci V8 engine, intercooled, 6-speed, chopped front end chassis, one-piece fiberglass front end, lightweight custom hood with reverse scoops, reinforced chassis, rollbar, lightweight hatch with lexan window, Koni road race adjustable shocks, custom adjustable chromemolly torque arm, Holley Stealth ram injection with Standalone, and many other goodies to take me from point A to point B faster than a 1000cc bike . Sadly right now it's been sitting in a garage for two years now... needs a new fuel pump, fuel hoses, clutch is busted, engine needs refreshing(last time I dynoed for a track event was almost 500rwhp...), tranny needs new bearings, etc, etc.... It just needs about $15K to get it going again... Well again with RC, I wanted to ask; Will a Kyosho Cobalt motor fit into a Optima/Javelin chassis? |
#4
|
||||
|
||||
Wow that is one awesome machine you have there I am rather impressed! The car is an MA-70 Supra however you may cringe when I tell you the motor is a 7M albeit heavily modified. I have had good luck with the 7M and the last one made 540rwhp. The valve covers are CNC custom made and the intake was made by a guy in the US, the Turbo is a GTX42R billet comp wheel, this build has been going for five years, the turbo didn't even exist when I started lol
I have bought some parts from a guy in PR in the past. I am planning on taking a photo of my modified Mid sitting on the valve covers when I get a chance. Let me know if the alloy wishbones would be of interest to you
__________________
___________________ Maxxum FF Ultima Pro Turbo Optima Mid SE Turbo Optima Mid SP Optima Mid Custom Special Lazer ZX Lazer ZX-R Lazer ZX-S |
#5
|
||||
|
||||
About the wishbones, yes, please send me a pic and price tag with shipping!!
Sorry, but a I am not a Supra guru, what is a MA-70? |
#6
|
||||
|
||||
I will get you some pics on the weekend
The arms will need polishing but that should be easy enough for you! An MA-70 is what they call a MKIII in the US, mine is an 89 model it looks a bit like a Corvette or Trans-Am the photo below is one the guys took when it was in a magazine some years ago
__________________
___________________ Maxxum FF Ultima Pro Turbo Optima Mid SE Turbo Optima Mid SP Optima Mid Custom Special Lazer ZX Lazer ZX-R Lazer ZX-S |
#7
|
||||
|
||||
That is one sinister looking Supra!!!!
A guy around here was locally famous for one he had just like yours, but in white color. I've never raced him when I was an irresponsible drag street racer, but I was told he was fast... very fast. The fastest thing I've raced was a preped 900cc Honda CBR. Acceleration and top end where almost equal, although I was slowly taking the lead on the top end. My GTA is not built for drag racing, but I did the occacional drag race pass. Please send me the pics when you get the chance. Thanks Ed Last edited by optiman; 01-12-2014 at 12:03 PM. |
#8
|
||||
|
||||
These are the wishbones, photo of both sides, they will need a polish but will come up nice I am certain
If you are interested make an offer or I can think of a price, they are a bit more cool to have than the new Pargu ones because these are the real deal vintage hop up. I scored some Andys wishbones for the project this may have been used on (SWB Trinity saddle pack chassis build with all vintage upgrades, very long term project) so I am happy to sell them now
__________________
___________________ Maxxum FF Ultima Pro Turbo Optima Mid SE Turbo Optima Mid SP Optima Mid Custom Special Lazer ZX Lazer ZX-R Lazer ZX-S |
#9
|
||||
|
||||
Quote:
Wow, Pargu's look like an exact copy of you originals. Please PM'd me a price and shipping quote for them. Thanks I have one question for you, will the rear Laser ZX5 hubs fit into Optima's stock arms? I also would like to know if the laser ZX5 front axle hubs will fit into the Optima's C hubs. I'm asking since you seem to have experimented with them in you MID project. |
#10
|
||||
|
||||
Quote:
These arms I think are a little more rounded on the edges however. The ZX5 stuff wont work with Mid arms, the Lazer arms are much longer, I never tried as I knew it was never going to work
__________________
___________________ Maxxum FF Ultima Pro Turbo Optima Mid SE Turbo Optima Mid SP Optima Mid Custom Special Lazer ZX Lazer ZX-R Lazer ZX-S |
#11
|
||||
|
||||
Slowly gathering the parts...
1)BCD Javelin aluminum rollcage 2)Kyosho Le Mans 240SPA motor 3)Pargu Aluminum front C hubs 4)Option House Clutch Setup Still needed 1)Aluminum arms 2)Aluminum front bumper brace 3)Aluminum top deck 4)Aluminum front turnbuckles 5)Aluminum wheels 6)Chromed or silver swingshafts 7)CNC'd aluminum rear hubs 8)CNC's steering linckage 9)CNC'd deck support 10)CNC's drive cups 11)Aluminum servo mount 12)Aluminum battery holder 13)Full aluminum shocks 14)CNC'd front tie rod holders 15)CNC's front and rear gearboxes(yes I decided to go all the way ) 16)CNC'd or laser cut bumper 17)Fabricated aluminum sheet metal chain cover 18)Aluminum wing 19)Full silver screw & nut set(possibly stainless) |
#12
|
||||
|
||||
Will you be able to make more than one of the CNC parts, maybe I can trade you my arms for CNC parts?
__________________
___________________ Maxxum FF Ultima Pro Turbo Optima Mid SE Turbo Optima Mid SP Optima Mid Custom Special Lazer ZX Lazer ZX-R Lazer ZX-S |
#13
|
||||
|
||||
UPDATE
An update for this build.
What I have gathered so far; 1)BCD Javelin aluminum rollcage 2)Kyosho Le Mans 240SPA motor and Le Mans 360ST 3)Pargu Aluminum front C hubs 4)Option House Clutch Setup 5)Aluminum arms 6)Aluminum differential drive cups front & rear 7)Aluminum dogbones front & rear 8)Aluminum upper adjustable tie rods 9)Stainless steel louvered panel 10)Kyosho underchassis cover 11)Aluminum King Pins 12)Almost brand new donor buggy What I still need: 1)Aluminum front bumper brace 2)Aluminum steering linkage 3)Pargu aluminum top deck 5)Pargu aluminum wheels 7)CNC'd fabricated aluminum rear hubs 8)CNC'd fabricated steering bellcrank 9)CNC'd fabricated deck support 10)Pargu aluminum servo mount 11)Pargu aluminum battery holder 12)Integy full aluminum shocks 13)CNC'd fabricated front tie rod holders 14)CNC's fabricared front and rear gearboxes 15)CNC'd fabricated or laser cut bumper 16)CNC'd fabricated aluminum metal chain cover 17)Pargu aluminum wing 18)Full aluminum or stainless screw set When finished the only visible non-metal, non shiny parts this Javelin will only have are going to be the tires, the motor endbell (if I go for the Le Mans 360ST and possibly the gears which they will be visible thru the Option House smoked lexan gear box cover. Everything else will be shiny Last edited by optiman; 01-12-2014 at 12:16 PM. |
#14
|
||||
|
||||
I'm very interested to see the final result but I'm also curious about the making steps.
__________________
Optimaforever__________________________ http://www.theoptimahouse.blogspot.be/ http://ultimahouse.blogspot.be/ http://www.autoscalestudio.com/ |
#15
|
||||
|
||||
when you make the CNC parts could you be persuaded to make more than one of each?
A cnc copy of the ot-93 bumper would be sweet
__________________
___________________ Maxxum FF Ultima Pro Turbo Optima Mid SE Turbo Optima Mid SP Optima Mid Custom Special Lazer ZX Lazer ZX-R Lazer ZX-S |
#16
|
||||
|
||||
Quote:
Chris, I am pretty sure that when I start CNC'ng the parts I'll make a couple more. |
#17
|
||||
|
||||
Update:
Got these today, they are vintage Cross brand Optima hubs. I will no deanodize them and polish them. I am also tinkering with the idea of nickel-chrome the rollcage and side guards, everything else will be polished aluminum. Some other good news is that the front and rear gearbox, chain covers and some other parts are being made as I write this down. I asked a friend to do me the favor, if it was for me I would be still taking measurements... |
#18
|
||||
|
||||
What I have for now...
|
#19
|
||||
|
||||
So far...
I am begining to assemble the Javelin to see if anything needs to be done. I decided to leave the few stainless steel parts like the roof, motor guard, number plate, rear louver and roof with the stainless steel satin natural look and chrome coat everything else made of aluminum; rollcage, wing, chassis, front bumper, arms, radio plate, etc, etc... The motor is a silver can stock motor, I think is very appropiate for the build and I am also planing on building the buggy without tires, leaving the un-covered wheels all chrome and shiny!!! |
#20
|
|||
|
|||
|
|
|