|
#1
|
||||
|
||||
any news on Additional Features and Jumps etc
as above
__________________
Adam Perei |
#2
|
||||
|
||||
Can get material (timber and plywood) from work at just above cost if needed.
|
#3
|
||||
|
||||
Hi Lads,
Not had time Been away for last couple of weeks and thought it more important to get the new track layout checked out and rehashed to suit the sections and have also repaired the sections/corners that have recently been damaged. 1 x 10 3 x 100's 1 x 98 1 x 90 and have created another 89 Could do with a sheet of 3mm (ish) ply to create a woop and a sheet of 6mm (ish) ply to create a table top and poss. another jump. Also Lee if you can get 18mm Marine ply at cost and get it cut to the following sizes, I could do with some of that for my trailer: 2 x 500mm x 1210mm 2 x 500mm x 870mm 1 x 870mm x 1210mm
__________________
Andy Ridley Losi 22 4.0, 22, XXCR, Losi 8 2.0EU, Tamiya F103GT, Mardave V12 (stock, brushless & Caterham), Mardave Cobra & Team Associated B3. Last edited by AndyRids; 27-09-2012 at 12:44 AM. Reason: add more detail |
#4
|
||||
|
||||
Andy,
I can get some of the 3mm ply with the black painted face for about sixty pence each, can get you the marine but you'll have to remind me Lee |
#5
|
||||
|
||||
Cheers Lee, I'll speak to you tomorrow night
__________________
Andy Ridley Losi 22 4.0, 22, XXCR, Losi 8 2.0EU, Tamiya F103GT, Mardave V12 (stock, brushless & Caterham), Mardave Cobra & Team Associated B3. |
#6
|
||||
|
||||
Lee,
Can you confirm the size & price of the 18mm Marine ply sheets and you say the 3mm ply is 60p a sheet, can you confirm sheet size of this aswell. May need half a dozen of the 3mm for myself Were do you work and would it be best me coming to pick up? Cheers AndyRids
__________________
Andy Ridley Losi 22 4.0, 22, XXCR, Losi 8 2.0EU, Tamiya F103GT, Mardave V12 (stock, brushless & Caterham), Mardave Cobra & Team Associated B3. |
#7
|
||||
|
||||
Andy,
The 3mm plywood size is 2196 x 1220mm i'll let you know on the marine as i've forgotten. Lee |
|
|