|
#1
|
||||
|
||||
b4 spur on b44
does the b44 and b4 share the same spur gear?
thanks matt. |
#2
|
||||
|
||||
They are 100% interchangeable but are different sizes from memory 81t b4 and 84t B44 or something similar to that, although there is every chance I've got them the wrong way around.
|
#3
|
||||
|
||||
thanks mate my b44.1 came with a 81t,im just working out what spares to buy.
|
#4
|
||||
|
||||
Hi,
The kit spur on the B4 was 81t Kit on the B44 was 84t Kit on the B44.1 was 81t (Think the B4.1 comes with 81 & 78) MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
#5
|
||||
|
||||
Whilst we're on the subject...
I fitted a B44.1 (81t) spur to my B44 the other night as it was the only 1 available, but left it with a 20t pinion (SP V3 6.5). To save me cursing the world and throwing the car at the cat in disgust at my mechanical incompetence (I'd rather not change the spur again) what pinion should I be running? Only race indoor at york and outdoor at RHR
__________________
|
#6
|
||||
|
||||
You'll want the same overall as you were running with the 84t
So 84 - 20 is 10.50 overall With an 81t spur a 19t pinion would give 10.66 over, as close as you can get between the two spurs. Gear chart. (PDF document) MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
#7
|
||||
|
||||
Quote:
__________________
Team Schumacher www.racing-cars.com Paint by www.customblitz.co.uk Feedback http://www.oople.com/forums/showthread.php?t=67178 |
#8
|
||||
|
||||
Quote:
|
#9
|
||||
|
||||
What's a screwdriver?
__________________
|
#10
|
||||
|
||||
Quote:
__________________
|
#11
|
||||
|
||||
Thats right gayhead the internals are the same, you need to alter your pinion size to compensate for the smaller spur.
|
#12
|
|||
|
|||
Yes sure does
__________________
Gareth Hill Schumacher - Sanwa - LRP - Mb models |
#13
|
||||
|
||||
I thought we'd just decided that they don't...
B4 std spur is 81t B44 std spur is 84t B44.1 std spur is 81t
__________________
|
|
|