|
#1
|
|||
|
|||
cleaning help
i finally was able to fix up my rc nitro car and decided to take it out after having it all tuned up.
after running about three full tanks into the car on a muddy field it became absolutely covered in yummy mud ive cleaned it all now with wd40 etc and its all like new however im posting this to hear how you all appraoch cleaning your nitro buggies let me know your tips/ideas
__________________
HOBAO HYPER 7 .28 |
#2
|
||||
|
||||
My method:
1.Get as much off at track as possible-Ideally with a compressor if there is one to hand. 2.After quick clean GT85 It all Cover everything-Specially bearings ect. 3. Take home..I use Muc-OFF as soon as you can wipe of other junk, and use a compressor/airbrush haha to clean mud.. then wipe off with brush. 4.Re apply GT85 put it away till next time-IF I was going to use it at practice or something.. 5.I only race, So I normally Relube wheel bearings ect after each day-Unless I know Im going to practice before.. Clean everything-Complete strip and clean/lube. 6.Hudy bearing grease bearings-Main focus diff and wheel bearings 7.Assemble-Check for worn/broken parts replace if necessery-Same with glow plugs and clutch shoes ect. 8.Rebuild-GT85-Leave 2 hrs wipe off excess-Smile at your work.. and have piece of mind its super clean and shouldn't have any issues next use. |
#3
|
|||
|
|||
GT85? im guessing this is a strong version of wd40?
__________________
HOBAO HYPER 7 .28 |
#4
|
||||
|
||||
http://www.gt85.co.uk/
Yea, Its great stuff you will see 80% of drivers using it. I use it all the time, after heat clean and spray-Mud and crap dosnt stick so easy on it.. so pray shock shell ect.. let it dry a few mins.. Then its like a clear film.. and great water displacer.. 1.Keeps your car clean 2.Good for loosening dirt. 3.Helps to get water out of bearings ect 4.USE IT LOL.. plus makes your car look a lot cleaner too lol |
|
|