|
|
#1
|
||||
|
||||
Hyper H2 setups
I think this would be a good place to put out setups in here
__________________
Answer RC team driver Formby models HB Racing D216 HB Racing D418 www.kandmacoustics.co.uk |
#2
|
||||
|
||||
__________________
Answer RC team driver Formby models HB Racing D216 HB Racing D418 www.kandmacoustics.co.uk |
#3
|
||||
|
||||
Hope the picture comes up ok. I was running the car with the flat kickup shim in the front. Missed that off the setup sheet. Any questions please ask. Thanks Ben
__________________
Schumacher Racing - Reedy - Schelle - TKR - Bandicoot Bodies - MIP - Nextlevelrc - Trishbits - Moss Models |
#4
|
||||
|
||||
I noticed you put down ball diff which one have you fitted
__________________
Answer RC team driver Formby models HB Racing D216 HB Racing D418 www.kandmacoustics.co.uk |
#5
|
||||
|
||||
We're testing a ball diff which hopefully should be out soon for those that want it. Seems to be a bit better on some of the more slippery indoor surfaces but for outdoors I don't think it'll make much difference if any.
I measured a variety of ball diffs and nothing else is a direct fit. The 22 diff is closest and does go in but the overall diameter of the gear is about 0.5mm larger so it does make the gearbox tighter, and it will need shimming too - not ideal but it can work if you're desperate.... |
#6
|
||||
|
||||
What pistons were you using ben?
__________________
2wd: TLR 22 2.0 4wd: TLR 22-4 TLR - Horizon Hobby - Spektrum - Dynamite |
|
|