|
#1
|
||||
|
||||
511 bearing spacer help
Getting through a build of another 511, I'm stuck sourcing these shims!
I'm after the rear drive shaft shims that go on the axle before the inner rear bering hub, BB6 part no 9804246 Also I'm after the front inner crunch spacer BE7 part no 9804303 Any help would be appreciated, or any other models of car I can use these from?? |
#2
|
||||
|
||||
Hi Mark,
I bought these a while back. The shims for the driveshafts come in a packet of 0.1, 0.2 and 0.3 Tonys Tamiya parts do them on ebay 10 shims in each packet you get all 3 in one packet for 6.99 matey. The crunch bearing spacer is same as kyosho Hope that helps matey. |
#3
|
||||
|
||||
That's a great help!
The crush spacers, are they from the zx5, or Rb6?? |
#4
|
||||
|
||||
Rb5 and Zx5 its what I used matey axles are same width.
|
#5
|
||||
|
||||
Part number for shims is 53587 5mm x 0.1, 0.2 and 0.3
|
#6
|
||||
|
||||
Thanks for the help xfactor, I've ordered the shims up from vellrip website in Singapore, let's hope they come through quickly!
|
|
|