Lazer zxr

[HKS_TRD]

Originally Posted by Welshy40

Dan,

Sorry mate, been through my stuff and have one on its own as I broke the other plus the alloy versions which I used mainly and from Kenon I think but not much else. I have another place to check out on Thursday so will keep looking.

No problem see how you go, appreciate you having a look

[Kiwi Kruisa]

HI guys,


Does anyone know where I might be able to get a rear pair of Equalizer shocks for my ZX-RR. Otherwise some medium length golds.


Regards,

[Welshy40]

Ebay, probably listed as kyosho shocks. Also do a search on the part numbers on google as well. Seen a set listed as kyosho 1/10 small bore shock absorbers with spare springs on ebay for £50, used but look ok to me. Buy while you can

[Welshy40]

Guys, under ebay worldwide search type in kyosho lazer zx as youll find a large amount of stuff including several nice cars and a nice mms alloy heatsink motor mount with a few spares for zx & zx sport for about £50 (listed as vintage kyosho lazer zx-r parts lot), which is worth it so whoever is after that motor mount get it while you can.

[HKS_TRD]

Anyone got any good pics of how the stickers should be applied to a ZX-R shell, box art and what comes with the kit seem to differ, was it the same for the MKI/II/RR?

[Welshy40]

Ive no idea, tbh never really payed attention to the box when a kit arrived.why not google the name and see what appears

[Kiwi Kruisa]

HI chaps,



I'm in need of a slipper pad for my Hyperclutch, without it it's useless. Refer item 193.








Thanks

[Kiwi Kruisa]

Opps I think it might be part UM123

[Welshy40]

You could always buy the rc10 b6 slipper pad and cut down if really stuck

[isobarik]

Originally Posted by Kiwi Kruisa

HI chaps,



I'm in need of a slipper pad for my Hyperclutch, without it it's useless. Refer item 193.








Thanks

Buy the slipper pad for the associated rc10 with the old style slipper its an direkt fit i use em , if i remember the partnumber i Will post it here
Med vänlig hälsning, isobarik

[Kiwi Kruisa]

Iso,

Have you got pics?

[isobarik]

Originally Posted by Kiwi Kruisa

Iso,

Have you got pics?

pics of what ??? rc10 pad mounted on the slipper ???

mvh isobarik

[isobarik]

http://www.ebay.com/itm/322321182115...%3AMEBIDX%3AIT

mvh isobarik

[Welshy40]

Ok, im back and aim to sort out two designs over the next couple of weeks. Once happy then will be looking at the front gearbox design and will put here for a discussion first before I have a design made up. Im going all out to finish what I started.

[Welshy40]

Ok update,ive finally finished developing the knuckle arms. Awaiting them to be finalised and getting made and will post pics before and after fitting. Similar to last posts but added strengthening as it wasnt strong enough. Finally done and finally happy with the design.

Now onto the rear gearbox design which think wont take too long considering Ive already designed the correct layout in CF, so now to put the design into the original gearbox casing.

Then onto the one design I am not so keen on, the front gearbox.

[rob m]

What was the knuckle design again?.....did it have a nyloc nut to screw the kingpin into?
Do you have an idea on price? I may be interested as my alloy ones are stripped again.


Are you still racing your lazer?

[Welshy40]

Originally Posted by rob m

What was the knuckle design again?.....did it have a nyloc nut to screw the kingpin into?
Do you have an idea on price? I may be interested as my alloy ones are stripped again.


Are you still racing your lazer?

Rob,

Yes still racing it every now and then. Once the knuckles have come in will post pics and yes nuts within so king pin goes through a nyloc nut to prevent losening when hitting full throttle as thats when it vibrates. Cost wise not too much but alloy may be a bit but still a work in progress

[alcyon]

I have already drawn up and printed a lazer front gearbox. Just have not tested yet.

[HKS_TRD]

pics are required!

[isobarik]

Originally Posted by alcyon

I have already drawn up and printed a lazer front gearbox. Just have not tested yet.

nice can we have a peak at it ....

mvh isobarik