Mardave Tyres & Pinons

[Thetrev.com]

HI,

please can you let em know what the best contact tyres are for the mardave, I am looking at the 48dp pinions on modelsport do I need the micro or long boss ones?

thanks

Trev

[LongRat]

Hey Trev,
you need hard on the front and soft on the rear. A good combination would be 50sh up front and 35sh at the rear. I have a set like this but have not yet run them. My current setup uses Jap 52sh up front and Mardave pink mediums at the rear, but I think the Contact tyres will be even better than this.
For pinions you only need a standard boss. Long boss isn't necessary. The bore must be standard (1/8"), not 3/32" (2.35mm) as this will not fit on the shaft of a 540 size motor.

DAVE

[ChrissieL]

Yes, the 50 fronts and 35 rears are what you want. Be careful of the front suffix. Fb is for the front bearing wheel and anything else well isn't . It does explain it on the Dave site

[Thetrev.com]

Thanks for the Info, new Tyres and Pinions ordered