Go Back   oOple.com Forums > Car Talk > Schumacher

Reply
 
Thread Tools Display Modes
  #1  
Old 13-01-2010
EddZilla's Avatar
EddZilla EddZilla is offline
Member
 
Join Date: Dec 2009
Location: Telford
Posts: 3
Default LiPo's - Tight under Pulley

Hello,

Tried installing my Bionic 5000mAh LiPo's in to a Cat SX and they are just about in contact with the pulley and the belt is going to drag all over them.

Has anyone come up with a mod to allow for slightly larger LiPo's? Thought about shimming the front and rear bulkheads to raise the pulley / lower the chassis. Shims would be about 1.5mm and fit between the bulkheads and the chassis. I have some concerns over doing this particularly for the front bulkhead as there seems to be a need for part of the bulkhead to step around the front edge of the chassis and there are also 2 rectangular cut-outs which also locate / align the bulkhead. Shimming will reduce this location and also reduce the groung clearance by the shim thickness.

The other thing i have noted is that the Bionic LiPo will be in contact with the front belt and this looks like it will need more than 1.5mm shim to clear. If i sit the battery further out from the centreline to clear the belt it won't fit in the under tray and it will still shift inboard if i get a shunt on the track.

Any other ideas would be welcome.

Lastly, i've just got back into RC after a lengthy 'baby break' and i'm stunned by how good LiPo's are but utterly frustrated by the fact that no 2 manufacturers LiPo's are the same size. Standardisation should be called for by BRCA and others.
__________________
EddZilla
Reply With Quote
  #2  
Old 13-01-2010
Matt-h's Avatar
Matt-h Matt-h is offline
Member
 
Join Date: Nov 2009
Location: Southampton
Posts: 256
Default

Hi, does the Lipo have 'humps' underneath or is it flat?

Matt
__________________
<a href=http://www.oople.com/forums/image.php?u=6380&type=sigpic&dateline=1267396303 target=_blank>http://www.oople.com/forums/image.ph...ine=1267396303</a>
FOR A FRICTION FREE RC!


Clubs
Reply With Quote
  #3  
Old 13-01-2010
mikeyscott's Avatar
mikeyscott mikeyscott is offline
Spends too long on oOple ...
 
Join Date: Mar 2009
Location: Hampshire
Posts: 7,223
Default

My new Nosram 5300 40Cs are tight on the stiff chassis - I think the speed passions are a better fit.

Think the Bionic ones are flat as I looked at them recently.

Have you fitted the Nortech retainer kit?
Reply With Quote
  #4  
Old 13-01-2010
EddZilla's Avatar
EddZilla EddZilla is offline
Member
 
Join Date: Dec 2009
Location: Telford
Posts: 3
Default

No retainer fitted at this point.
The problem is that the battery fouls the pulley and the chassis would need some modification to accepy the Bionic batts.
For info the Bionic 5000mAh 40C batteries are 25mm high and are a flat bottomed brick.
__________________
EddZilla
Reply With Quote
  #5  
Old 13-01-2010
bigred5765's Avatar
bigred5765 bigred5765 is offline
Lion-O - King of the Thundercats
 
Join Date: Mar 2006
Location: chorley
Posts: 8,474
Send a message via MSN to bigred5765 Send a message via Skype™ to bigred5765
Default

they are close but at the size u mention they shouldnt touch
__________________
Mattys the driver,my names carl
Reply With Quote
  #6  
Old 15-01-2010
EddZilla's Avatar
EddZilla EddZilla is offline
Member
 
Join Date: Dec 2009
Location: Telford
Posts: 3
Default

I can assure you that they are in contact with the pulley.
I took the 25mm dimension from the website so it could well be 25.something mm. Either way i cant run the car with this condition. More worrying is the possible contact with the front belt.
__________________
EddZilla
Reply With Quote
  #7  
Old 15-01-2010
mikeyscott's Avatar
mikeyscott mikeyscott is offline
Spends too long on oOple ...
 
Join Date: Mar 2009
Location: Hampshire
Posts: 7,223
Default

Is it a new Cat SX or second hand?

My Nosram's are super tight in the stiff chassis to the point were they have had their sticker partly taken off by the belt area.
Reply With Quote
  #8  
Old 15-01-2010
discostu's Avatar
discostu discostu is offline
Mad Member
 
Join Date: Jul 2008
Location: Whitstable
Posts: 1,571
Default

you have them slid to the middle to far are you sitting them in front of the motor clamp if so they shouldnt they should be just about level with the edge of the chassis
Reply With Quote
  #9  
Old 15-01-2010
MHeadling's Avatar
MHeadling MHeadling is offline
*SuPeRsTaR mEmBeR*
 
Join Date: Apr 2007
Posts: 4,241
Default

I have tried the Bionic 5000 mah in my CAT (Phil Booth) when I was at LHS, Its too big I think, dont know how you can make it fit? it rubs front pulley, the only way I can think it will fit is to raise the front bulk head but this will screw up the handling.

Not sure what you can do really? Sell it and buy LRP/Trakpower/Speed Passion?
__________________

www.rccarshop.co.uk
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:18 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com