Go Back   oOple.com Forums > Car Talk > Schumacher

Reply
 
Thread Tools Display Modes
  #1  
Old 14-01-2017
CARB CARB is offline
Senior Member
 
Join Date: Jul 2012
Posts: 403
Default New Schumacher KC

I see MB Models advertising KC for delivery late February! nothing on the Schumacher site apart from the KD.
Reply With Quote
  #2  
Old 14-01-2017
charlesk's Avatar
charlesk charlesk is offline
Senior Member
 
Join Date: Apr 2013
Posts: 460
Default

This is what MB have posted on their FB page:
"Now taking Pre-Orders for Schumachers new 2wd buggies!
Dirt Version - Due Early Feb
Carpet/Astro Version - Due Late Feb (This may not exist, we have made it up)
£50 secures your kit from the first batch.
Thanks
MB"
Think the expectation is for an updated 2wd, but nothing confirmed yet...
Reply With Quote
  #3  
Old 14-01-2017
DarkHawk DarkHawk is offline
Senior Member
 
Join Date: May 2014
Posts: 786
Default

The manual for the KD has confirmed that the KC is coming out
Reply With Quote
  #4  
Old 14-01-2017
charlesk's Avatar
charlesk charlesk is offline
Senior Member
 
Join Date: Apr 2013
Posts: 460
Default

Quote:
Originally Posted by DarkHawk View Post
The manual for the KD has confirmed that the KC is coming out
Link?
Reply With Quote
  #5  
Old 14-01-2017
DarkHawk DarkHawk is offline
Senior Member
 
Join Date: May 2014
Posts: 786
Default

Quote:
Originally Posted by charlesk View Post
Link?
I've downloaded the manual on my phone from the Schumacher website but they have now removed it probably due to the fact that it also confirmed the KC which they have not announced
Reply With Quote
  #6  
Old 14-01-2017
CARB CARB is offline
Senior Member
 
Join Date: Jul 2012
Posts: 403
Default

I recon it will still be a belt driven car looking at the holes in the chassis of the KD, but with the new shock tops and carbon side rails a sort of KF3. They must think that getting the motor forward with the belt and the battery behind it is better than the battery in front of the motor that the gear drive allows.
Reply With Quote
  #7  
Old 14-01-2017
bish's Avatar
bish bish is offline
Member
 
Join Date: Dec 2007
Location: Midlands, UK
Posts: 189
Default

The manual was available, I looked through it and noticed that a note said "KD/C". In a couple of sections.

It since got taken down! (Shhh)

CARB, i think your right. The only way to get weight forward enough would be with belt or shaft. Tempted to get a KD and convert to KC if needed.
__________________
Getting back to UK racing.
Schumacher - Tekin - MRT - Futaba
KC
LayDown
BossCat inbound...

Last edited by bish; 14-01-2017 at 07:30 PM.
Reply With Quote
  #8  
Old 14-01-2017
neallewis's Avatar
neallewis neallewis is offline
*SuPeRsTaR mEmBeR*
 
Join Date: Feb 2012
Location: UK
Posts: 3,368
Default

Surely the KC will be a production version of the 3 gear belt format car that Orlowski was rocking at the DHI cup?
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2
-------------------------------------------------------------------------------------------------------------------
10electric | Batley Buggy Club | YORCC | RHR | MB Models
---------------------------------------------------------------------------------------------------------------
Reply With Quote
  #9  
Old 15-01-2017
Suzukitudor's Avatar
Suzukitudor Suzukitudor is offline
Member
 
Join Date: Aug 2014
Location: South London
Posts: 188
Default Kc

It will be like the 3 gear Neal I agree. That thing went so well there I can't see them not releasing it like that.

Wonder if people will flood back to Schumies after all getting B6's and yz2's (myself included!)
__________________
Yokomo YZ2's. CaL2 and DTM2.
Kyosho lazer zx
Cat 2000
RC10 Worlds
RC10 B3
Cougar 2's
Topcat
Tamiya DT02 - use as a door stop.
Tamiya TL01 - paper weight.
Tamiya Mini - awesome fun to race

THR - Tudor-Hart Racing - Custom RC products - find us on Facebook.

SHRCCC Committee Member- Track features - design and build.

Returning racer after 25 year break - miss my Optima Mid Custom Special, but not brushed motors & SCE cells.

www.shrccc.co.uk

Reply With Quote
  #10  
Old 15-01-2017
CARB CARB is offline
Senior Member
 
Join Date: Jul 2012
Posts: 403
Default

I can not see people switching, not because it is not a good car but with kits being £300 + each time things are getting expensive compare to a few years ago when it was closer to £200 for a kit.

Someone needs to build a kit that has a module that carries the gear box, shock tower, rear wishbones, motor and speed controller for high grip and a second module that has the same but for low grip.

So you buy either a single module for your specialist condition or buy both if you do high and low grip, this way you only have one front end with servo, transponder etc and two rear ends complete ready to switch as and when.
Reply With Quote
  #11  
Old 15-01-2017
cannonballmac's Avatar
cannonballmac cannonballmac is offline
Member
 
Join Date: Sep 2015
Location: Dumfries
Posts: 70
Default

I've recently bought the Serpent as it has two gearbox options in the box. A few other kits offer this including Kyosho and PR. The drawback of swapping between high and low grip gearboxes is the side pods. The gearbox dimensions are different and need different mounting holes which then gives more room for battery placement.
I love the availability nowadays and yes the kits cost more but I don't find details myself having to buy option parts like I did previously.

The Schumacher kits have always looked great and are generally over engineered.

I agree a bit of simplicity would help, especially newcomers as the 3 and 4 gear options are a minefield.
__________________
Team Serpent UK - SRX2MH & SDX4
Absima power - Rudebits - TMG Speed

Last edited by cannonballmac; 15-01-2017 at 03:48 PM. Reason: Bad spelling
Reply With Quote
  #12  
Old 15-01-2017
micholix's Avatar
micholix micholix is offline
Senior Member
 
Join Date: Jul 2012
Posts: 318
Default

I'm not a big racer at all, just do some club races here an than, but i never understood the sense about an mid motor car with battery next to it and a forward motor car with the motor up front of the battery?

Lets say, a motor does weight arround 180 g and a shorty pack by about 210 g, not much differents there?
with an chassis, like modern 2wd cars have, you have alot of place to move the battery further to the front, not like back in the days, we used to use stick packs in the centre line.
By moving the shorty up to the front and may the esc all the way front to the servo, i get nearly the weight distribution from a forward motor car on an mid motor car.

Can someone please tell me, what is a good, or the best weight distribution for mid and for a front motor car?

Edit: i better ask, the differnt weight distribution between an high bite and mid-low bite track for a 2wd?


Thanks in advance
Mike
__________________
Greetings from Austria!

My cars:
CatK2/CougarSVR/BossCat/Dex410v3/Dex410v5/Dex210/Dex210F/Yokomo yz-10‘94/Yokomo yz-10‘95/

Last edited by micholix; 15-01-2017 at 04:38 PM.
Reply With Quote
  #13  
Old 15-01-2017
CARB CARB is offline
Senior Member
 
Join Date: Jul 2012
Posts: 403
Default

It is complicated, it is not just the physical weight of the parts but also the rotational mass, think of the motor as a gyro so the nearer the centre length wise of the chassis the easier the chassis can rotate.
Plus a load of other stuff the chassis designers are aiming for.
Reply With Quote
  #14  
Old 15-01-2017
micholix's Avatar
micholix micholix is offline
Senior Member
 
Join Date: Jul 2012
Posts: 318
Default

Quote:
Originally Posted by CARB View Post
It is complicated, it is not just the physical weight of the parts but also the rotational mass, think of the motor as a gyro so the nearer the centre length wise of the chassis the easier the chassis can rotate.
Plus a load of other stuff the chassis designers are aiming for.
Thanks CARB for that info, i forgot about the gyro effect from the motor, you are absolutly right!

As you sayed chassis designers, many of the factories are working on chassis flex as an tuning option, i never will belive in that, that a chassis should do the job, the suspension is for, if you have a well balanced car (shockwise), you can have a bone hard chassis and let the suspension do their job, while the chassis is there, to hold things together, thats what i always will belive in, like on real cars....
You cant controle that force, it's like a compressed spring, that unloads, when the counter force is not anought anymore, so you never know, when this will happen!
It could just be a litte bump, that lifts the car a bit, or a jump, or a lifting wheel from the ground, or whatever, it can happen every time and its not controliable.
I hope you understand what i mean, its hard for me to explane, because my english is not that good?

I've got a new 4wd on my bench since a while now, never drove it since, as the rear end flexes like hell, right now i'm on the way, to make my own cf side rails and stiffen up the chassis as much i can, if i cant get it, i would like to have it, i'll sell it!

Thats just i belive in, may i'm totaly wrong!?

Edit: for an example, i run my k2 with saddle packs and to get the right balance, i run the hardest (black) core rear springs and the softest (white) core front springs, no one ever would do that i think, but i like how it handles that way!
__________________
Greetings from Austria!

My cars:
CatK2/CougarSVR/BossCat/Dex410v3/Dex410v5/Dex210/Dex210F/Yokomo yz-10‘94/Yokomo yz-10‘95/

Last edited by micholix; 15-01-2017 at 07:15 PM.
Reply With Quote
  #15  
Old 15-01-2017
mes mes is offline
Mad Member
 
Join Date: Jun 2006
Posts: 1,160
Default

Quote:
Originally Posted by micholix View Post
Thanks CARB for that info, i forgot about the gyro effect from the motor, you are absolutly right!

As you sayed chassis designers, many of the factories are working on chassis flex as an tuning option, i never will belive in that, that a chassis should do the job, the suspension is for, if you have a well balanced car (shockwise), you can have a bone hard chassis and let the suspension do their job, while the chassis is there, to hold things together, thats what i always will belive in, like on real cars....
You cant controle that force, it's like a compressed spring, that unloads, when the counter force is not anought anymore, so you never know, when this will happen!
It could just be a litte bump, that lifts the car a bit, or a jump, or a lifting wheel from the ground, or whatever, it can happen every time and its not controliable.
I hope you understand what i mean, its hard for me to explane, because my english is not that good?



I've got a new 4wd on my bench since a while now, never drove it since, as the rear end flexes like hell, right now i'm on the way, to make my own cf side rails and stiffen up the chassis as much i can, if i cant get it, i would like to have it, i'll sell it!

Thats just i belive in, may i'm totaly wrong!?

Edit: for an example, i run my k2 with saddle packs and to get the right balance, i run the hardest (black) core rear springs and the softest (white) core front springs, no one ever would do that i think, but i like how it handles that way!
As with many things, it is the right amount of flex that matters, and of course also the direction of flex. Even on high-grip astro, I was surprised just how much better my YZ-4 became when I moved from the standard top deck to the LMR/MR33 top deck and finally the cut ultra-flex version. Adjustable flex is here to stay for a reason, and most average drivers will do better with a more forgiving i.e. flexible car with a wider set-up window. With a stiff car, your set-up has to be spot on or your car/truck will be slow or even become undrivable.
Further to your K2: I am not surprised to see some very hard springs together with saddle-packs as the car will most likely be quite heavy in the rear, and the softer front springs will probably make up for the increased rear-biased weight distribution. You should not care too much about other peoples' opinion as long as your set-up works for you. However, make sure to try various things with a transponder in your car, sometimes what is fast does not feel fast. Another enlightening moment was to see how much faster my B5M was on dirt with a lighter battery although the saddle pack felt better...
Driving style plays an important role, too. In most cases, pro-driver set-ups where all but useless for me because I would hit the brakes at the wrong time and put the car on its roof.

But I digress, sorry about that! It is great to see so much development going on in the 2WD buggy class. Maybe it is about time for me to give Schumacher another shot. It has been some time since my Cougar 2 Team!
__________________
NRW Offroad Cup

Last edited by mes; 15-01-2017 at 08:14 PM.
Reply With Quote
  #16  
Old 16-01-2017
mattr mattr is offline
Mad Member
 
Join Date: Mar 2011
Location: Sweden
Posts: 1,838
Default

Quote:
Originally Posted by micholix View Post
Thats just i belive in, may i'm totaly wrong!?
Yup

It's a toy car, the suspension (shocks specifically) are toys. A plunger moving in a pot of oil. It's never going to work like a real car.
Some flex is a good thing, the engineers can only judge on what they know and how they drive. If the flex is "wrong" (completely subjective) you'll have issues.

We even engineer in flex to 1:1 scale car suspension systems. As the suspension/shocks can't do everything.
Reply With Quote
  #17  
Old 16-01-2017
Kev B's Avatar
Kev B Kev B is offline
Member
 
Join Date: Feb 2008
Posts: 214
Default

http://www.racing-cars.com/pp/Car_Sh...Cougar_KC.html
__________________
Kevin Bishop
K.B. Design https://m.facebook.com/KBGraphixandD...?ref=bookmarks
Cat 2000ec, Club 10 Cougar, SST Rally and touring. All about the Vintage Racing.
Reply With Quote
  #18  
Old 16-01-2017
chrispattinson's Avatar
chrispattinson chrispattinson is offline
Mad Member
 
Join Date: Dec 2005
Location: South Shields
Posts: 1,756
Default

Both cars look amazing. Good job Schumy.
__________________
Schumacher racing
http://www.racingcars.com ne-rc.blogspot.com
My Trader Feedback : www.oople.com/forums/showthread.php?t=25402
Reply With Quote
  #19  
Old 16-01-2017
jpmatrix jpmatrix is offline
Senior Member
 
Join Date: Dec 2010
Location: Hampshire
Posts: 554
Default New 4wd

Very nice looking kits for the 2wd.

Is there going to be an update on the 4wd platform?
Reply With Quote
  #20  
Old 16-01-2017
mes mes is offline
Mad Member
 
Join Date: Jun 2006
Posts: 1,160
Default

Really interesting piece of kit! I guess after buying my first Xray since about ten years ago it may be time to get my first Schumacher since 25 years ago... It seems I am getting old!
__________________
NRW Offroad Cup
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 09:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com