|
#1
|
||||
|
||||
cougar 4
hi
i was playing around with my schumacher cougar and had a brain wave, so ive managed to fit most of a rear end of a b4onto it but come across a problem wiht the b4 gear box fitted the cvd's are 15mm sort ive measured the width of the gear box out drive included and its 50mm and i was wondering if any one knows if there is a gear box from a 2wd which is around 65mm wide (i was thinking maybe an older model such as a losi xx or a b3/b2 or any others any help woould be greatly appriciated cheers |
#2
|
||||
|
||||
What about using T4 truck cvd's they will be a bit longer ?.
__________________
Jonathan | Atomic-Carbon |
#3
|
||||
|
||||
good point did nt think of that ill have to try and get hold of some
thanks a lot |
#4
|
|||
|
|||
how has this come along then?
|
#5
|
|||
|
|||
I think the Traxxas TRX1 to TRX3 where wide enough , parts are still available for the TRX3/TCP and the internals are practically the same as the current cars bar the layshaft gear you need to get a 21t steel gaer and your sorted. . Go to the rc10 sit and that has all the details you may need
|
#6
|
||||
|
||||
i put a b3 box on a cougar 2, used the original plastic driveshafts and cut,modified and pinned a pair of wheel axles into the b3 outdrives for them to connect to
|
|
|