|
#1
|
|||
|
|||
brushless motor bearing replacement
1 of the bearings in myFantom 17.5 seems a little notchy, even after cleaning and re-oiling. How easy/succesful is it to replace them?
I have no specialist bearing punches/pullers etc. Also what size would they be?
__________________
B6 |
#2
|
||||
|
||||
Hi,
I'm not sure of the size needed for the Fantom motor, but I'd guess the information is on the Fantom website. Where is the bearing that needs replacement? Can or endbell? In the bearing in the can is generally a tight fit but you should be able to tap it out. Same for re-assembly, but make sure the bearing sits in square. If you can get / borrow one of these it makes it really easy to change the bearing. Link: https://www.rcmart.com/index.php?rou...&osc_sku=62692 MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
#3
|
|||
|
|||
Thanks Mick, that looks a nifty tool
__________________
B6 |
#4
|
||||
|
||||
Hi,
I've one for motor bearings. Makes it a real quick job. MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
|
|