|
#21
|
||||
|
||||
Quote:
Personally weight is a key to the car from personal experience with the car. What battery formation are you running? I run stubby across the back and it gives me enough grip in the dry and the wet. I have run saddles as well across the chassis and thought that if I was to run them more then would need to add weight in front of the motor behind the batteries. In terms of weight you are talking around 50-60g. I have ran mine in wet conditions over the winter and have never seamed to struggle for rear end grip with this set up. Also make sure that everything is running free and ensure that the diff has enough grease in it. Think mine has the grease filling well over the diff gears.
__________________
2wd: TLR 22 2.0 4wd: TLR 22-4 TLR - Horizon Hobby - Spektrum - Dynamite |
#22
|
||||
|
||||
Wes,thats the first thing make sure with the black grease you have the diff packed right out,i ran my wet saddle setup all day and the car was planted in both the wet and dry conditions
I run,front 32.5 with blue losi springs,rear 27.5 losi yellow springs,60g plate along the length of the lipo tray and 50g in front of the motor,me and Andy both use a 35g plate i made in front of the servo,we found with the saddle setup you have to run alot more weight than with the shorty or stick layout. If your doing the Kidderminster summer series come over and we will see what we can do to help you out,i will also have another version of the H2 that im working on at the minute so could have another option to try if all goes well
__________________
Cobra Racing Products,Penguin Custom Bodyshells,Ultimate RC Workshop,RC Car Zone |
#23
|
||||
|
||||
If you are at the kiddy summer series in a few weeks or at the next regional bring the car over and we can have a look to see if there is a problem as personally the set up that you were running wasn't far off what we were running so wondering if there is possibly a failure somewhere.
__________________
2wd: TLR 22 2.0 4wd: TLR 22-4 TLR - Horizon Hobby - Spektrum - Dynamite |
#24
|
||||
|
||||
Thanks very much both. I'll come and see you next time. Just out of interest do you know where I can get larger tubs of associated black grease rather than the tiny little tubes?
__________________
Wes Associated B5M, Team C TC02C, Team Durango DEX410v3 |
#25
|
||||
|
||||
Quote:
Pop over and I'm sure one of us can take a look. It did go slippy in the final though. |
#26
|
|||
|
|||
Gentlemen, your help please.
I'm struggling with on power understeer particularly coming out of corners. I'm running indoor on carpet with almost the same set up as Madmax used at Southport. The differences are my rear shocks are on the bottom outside hole and front shocks are on the bottom inner hole. Also I am using mini pins on the back and cut staggers on the front. Will moving the shock position help with the understeer? Or am I actually just being heavy handed with the throttle? Many thanks for any help. |
#27
|
||||
|
||||
So I packed the diff with grease after last Sunday and went back to Telford last night for a club night. The first ruin was in the dry and it was awesome. Then it rained and in the 2nd run it was undrivable again, I had the slipper backed right off and it still wanted to spin around every time I touched the throttle.
Frustrating! I'm going to try more weight behind the lipos in future.
__________________
Wes Associated B5M, Team C TC02C, Team Durango DEX410v3 |
|
|