|
||
|
 |
|
||||||||||||||||||
|
#1
01-05-2016
|
||||
|
||||
Shelf Queen Alloys - 2nd Run New Kyosho Designs
I have been talking to Wayne aka Edmundsdesigns via email about doing a second run with modified designs.
The deal is we need 15 takers for a set of four with each set coming at 45gbp. The new designs we are looking at 1. Kyosho 12mm hex rear, corrected offset and width 2. Kyosho 12mm hex 2WD front 3. Kyosho 12mm hex 4WD front, modified offset to work on everything EXCEPT the zx-r which is the only buggy the current version works on **pending interest** Below is the list I'll maintain to track interest, rest assured Wayne will chime in and get involved once we have the numbers 1. Rylance1878/HKS_TRD: set of four rears in blue to split between us 2. HKS_TRD: Set of 2WD (2 front+2rear) in black
__________________
___________________ Maxxum FF Ultima Pro Turbo Optima Mid SE Turbo Optima Mid SP Optima Mid Custom Special Lazer ZX Lazer ZX-R Lazer ZX-S 
|
|
#2
03-05-2016
|
|||
|
|||
|
wheels - making them again
Hello All,
~Please accept my apologies but i am so pushed for time its unreal, i am not ignorant and want to make this happen..... 100% Firstly i will provide a spreadsheet same as i did before, in that document you can all add what you want, then we look to see if its a goer! I will post it here later today and hopefully help you all will have a better and easier way of managing the interest i too can keep a quick eye on progress Wayne
|
|
#3
03-05-2016
|
|||
|
|||
|
wheels
we are talking revision 3, images as agreed on previous thread, note the offset and images of the rear wheels are attached....... any problems lets speak up soon!
thanks Wayne
|
|
#4
03-05-2016
|
|||
|
|||
|
wheel management
as promised
https://files.mycloud.com/home.php?b...els_new_kyoshu ALSO ATTACHED, please use this format save as if you need to. thanks a lot all Wayne
|
|
#5
25-07-2016
|
||||
|
||||
 Just thought I'd share a photo of my ProCat fitted with a set of the red 5-spokes from the first batch of these wheels - which set-off the custom painted Parma FatCat body just perfectly! Needed a bit more back-lighting to really show off how the colour of the wheels really 'pop' in real life 
__________________
TeamC TM2 (V1) Xray T4 15' (I finally conformed!) Associated R5.1 1/12th Pan Car (Occasional Racer) + too many vintage racers to list!
|
|
#7
25-07-2016
|
||||
|
||||
|
Quote:
__________________
TeamC TM2 (V1) Xray T4 15' (I finally conformed!) Associated R5.1 1/12th Pan Car (Occasional Racer) + too many vintage racers to list!
|
|
#8
25-07-2016
|
||||
|
||||
|
Is anyone at all interested in the new design for Kyosho buggies with the correct offset?
__________________
___________________ Maxxum FF Ultima Pro Turbo Optima Mid SE Turbo Optima Mid SP Optima Mid Custom Special Lazer ZX Lazer ZX-R Lazer ZX-S
|
|
#9
27-11-2016
|
|||
|
|||
|
Hi Dan,
It looks superb i am so happy that you like the wheels! can i use your image on my website juss to generate more interest in my designs fo other parts too? Wayne
|
|
#10
04-12-2016
|
||||
|
||||
|
Hi Wayne, maybe you should try selling the remainder of these on FaceBook and/or we could try for a group buy on the revised design on the Kyosho FaceBook page if you are interested
I would still love to get the rear design corrected and if possible have a new narrow front for use on Kyosho 2WD with 12mm hexes on the front wheels
__________________
___________________ Maxxum FF Ultima Pro Turbo Optima Mid SE Turbo Optima Mid SP Optima Mid Custom Special Lazer ZX Lazer ZX-R Lazer ZX-S
|
 |
|
|
Linear Mode
