Go Back   oOple.com Forums > Advertisers >

Reply
 
Thread Tools Display Modes
  #1  
Old 06-02-2014
Darren Boyle Darren Boyle is offline
oOple Advertiser
 
Join Date: Jan 2008
Location: Watford, Herts
Posts: 4,501
Default RDRP - Ultra Series New Tools...

Several great new tools in the Ultra Series range now in stock from RDRP including the following;
RDRP0099 –Ultra Series Body Reamer - £28.99
The Revolution Design Racing Products Ultra Body Reamer is a must have item when preparing a new body shell. Making use of the proven RDRP tool handle for effortless usage the reamer is equipped with a high-quality spring steel reamer tip. The stepped design allows to drill holes from 3mm up to 11mm. A vented safety cap protects the tip as well as your hands and other tools in your pit bag. The black anodised handle sports the proud Revolution Design Racing Products logo to make the reamer stand out.
RDRP0100 - Ultra Series 17mm Wheel Nut Wrench - £22.99
The Revolution Design Racing Products Ultra Wheel Nut Wrench 17mm is designed for the use with the 17mm wheel nuts of 1/8th buggies, truggies and GT cars. Its ergonomically shaped and black anodised aluminium handle allows for a secure fastening of the car's wheel nuts while and simple undoing of them at the same time. The hard anodised 7075-T6 aluminium shaft is long enough even for high offset truggy and monster truck wheels but still compact to not cause any trouble in your pit back during storage or transportation. The laser-etched logos on the handle also give the wrench that factory look.
RDRP0101- Ultra Series Glowplug Wrench - £18.99
The Revolution Design Racing Products Ultra Glowplug Wrench is designed for the use with standard and turbo glowplugs. Its body is made from high quality spring steel and incorporates an 8mm nutdriver for the plug while a thread at the top end of the tool takes a spare glow plug, making the wrench the ideal companion for demanding qualifiers and finals. Laser-etched logos make the tool stand out while a sturdy cross pin makes tightening and undoing even tightly fitted plugs a breeze.
RDRP0103- Ultra Series Flywheel Puller Tool - £23.99
The Revolution Design Racing Products Ultra Flywheel Puller makes maintaining nitro clutches easy. By clamping the black anodised aluminium fork behind the flywheel and turning down the shaft the flywheel is pulled away from the crankshaft without damaging any part. There is no need to use a hammer or other monstrous tools to loosen a tightly fitted flywheel. On top of all the Ultra Flywheel Puller is also equipped with a 10mm nut driver that is ideal to tighten the clutch nut after refitting the flywheel. Both the black anodised aluminium fork and the high quality spring steel shaft sport the RDRP logos for a factory look and easy identification.
RDRP0104- Ultra Series Flyheight 3 in 1 Multi Tool - £17.99
The Revolution Design Racing Products Ultra Flyheight Tool is the ultimate multi-use tool for nitro buggy and truck racers. Made from aircraft-quality 7075-T6 aluminium the tool incorporates a flywheel tool, a clutch gap gauge and a ride height gauge. The shape of the tool allows to securely fasten 3-pin and 4-pin flywheels while fastening the clutch nut and therefore it is the ideal combination with the RDRP0103 Ultra Flywheel Puller. Once the flywheel and the clutch bell are fitted you can measure and adjust the axial play using the clutch gap gauge. This handy feature let's you measure the axial play between 0.3mm and 0.9mm in 0.1mm increments. On top of that you can measure the chassis ride height in a range of 20mm up to 40mm by simply placing the tool underneath the chassis plate. 1mm increments make for a precise adjustment while the black anodising and white laser-etched markings give the tool a factory look.
All items available now from you preferred X-Factory UK stockist

__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER
AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF
AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI
X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ
TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ
Tel : (01923) 816636
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:17 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com