|
|
#1
|
|||
|
|||
thanks for the feedback
gonna order some of them pinions ive been looking through the net but cant find any ref to what size mounting screws the mamba micros take. Im in work so cant measure the holes any ideas? thanks |
#2
|
|||
|
|||
yay, my bits arrived this morning, fitted a 12t rc18 pinion to the mamba 8000k/11.1 setup, been ragging around my shed...awesome!!
only problem is the gear cover doesn't fit on without binding the pinion. So ill have to drill a hole in it, unless there is a third party one with more room? still waiting for the 3racing shocks though, so its still in gerald mc boing boing mode. servo response is much better than i imagined, and i like the way you can turn it on and off from the top of the car. looking forward to making it race worthy, happy days ta |
#3
|
||||
|
||||
Rather than drill a hole in the cover, use washers or a rubber o-ring between the cover and the gearbox so that it clears the pinion.
|
#4
|
|||
|
|||
The problem for me is the holes do not line up at all to mount my mamba in my mini fox. How did you get yours to fit please?
|
#5
|
||||
|
||||
When i fitted my Mamba i had to open one of the holes up a tiny bit on the motor plate.
If you look at the mounting holes on the motor,there are different distances,offer up the widest ones and you will see how much the plate holes have to be opened,it`s only a tad. |
|
|