|
#1
|
||||
|
||||
gear diff build?
Were can ifind instructions about building the 22 gear diff? What oil is a good starting point for carpet racing?
Thanx |
#2
|
|||
|
|||
As posted on gear diff topic,I´ve built mine,using exploded view from rtr manual -> http://www.losi.com/ProdInfo/Files/LOSB0122_Manual.pdf
I have 3k on mine and its pretty good on carpet. |
#3
|
|||
|
|||
Here is my basic build thread
http://www.rcottawa.com/forum/index.php?topic=10390.0 Ok so it took about 4 minutes to build but so i took some picks LOSI LOSA2954 Price: $30 +/- $5 Builds like any gear diff but here is what i did: -Download RTR manual page 37 for reference -Used Associated Green slime on the o-rings -Sanded the out drives where hole is drilled for the drive pin. To get rid of the sharp edge that could cut an o-ring seal -Used Tamiya Anti wear grease on out drive shafts and behind the diff washers and used to capture the drive pin into the out drive. also used a bit on the gear shafts -Filled with 5000cst and screwed shut the gear in a cross pattern to ensure a proper seal. As you can see there is a 9-10 gram penalty running this diff. |
|
|