|
#21
|
|||
|
|||
Quote:
It wont suit everyone, no car ever does, but it is another option out there for those who dont fancy one of the existing forawd motor options (none of which are "cheap" from new either it has to be said) or for someone who has a B44 or B4 (or even both) kicking around that they fancy converting into somthing new.. Lets face it in 4wd there are proably more second hand B44's kicking around than any other 4wd car and in 2wd I dread to think how many B4's are out there now sat doing nothing... Judging by the pre-orders received already in just one afternoon, it seems to be going down quite well with the public already, which after all is what counts I guess...
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
Last edited by Darren Boyle; 02-04-2014 at 10:06 PM. Reason: Added a bit |
#22
|
||||
|
||||
I was very impressed when I saw eds and it was pretty good at the T Crown on its maiden voyage as you say it can only be a good thing having the option.
stu
__________________
|
#23
|
|||
|
|||
x-s
hi,
as darren suggests, ours was made from a B44 that was too old to sell, with just the b44.2 slipper shaft, it does not have to be a brand new kit. les xtreme |
#24
|
||||
|
||||
I have an x6 squared and a b44, what else would I need and level one or two.
|
#25
|
|||
|
|||
Quote:
You will need the following; For the B44 - the B44.2 centre layshaft (AS9910), B44.2 centre rear CVD driveshaft AS9911), VTS slipper clutch (AS91175 or Avid equivalent) and the B44.2 centre gear cover (AS9913 or equivalent) - approx cost for all four parts £33 Your X6 Squared front suspenion and steering can all be used, but what the Squared does not have that the Cubed would have is the Graphite Nose Piece, Carbon chassis stiffeners etc, antenna mount, alloy top deck mounts, top deck posts, battery posts, Cubed body and wing, but ALL of these come in the Level 2 set, so in your scenario, the Level 2 is what you would require. Hope that helps.......
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#26
|
||||
|
||||
Quote:
__________________
|
#27
|
|||
|
|||
Quote:
Level 2 conversion and the few B44.2 parts listed as per above would be what is required.....
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#28
|
||||
|
||||
Darren, would it be possible to put a complete car kit together? Bring all the items together from the donor cars as spares so those that would like one but don't own a B44 etc. can just order one thing?
__________________
Dragon Paints |
#29
|
|||
|
|||
Quote:
As said earlier in the thread, it is designed to be a conversion for those either with a B44.2 OR an X6 Cubed already, without the manufacturing facilities and having to rely on OEM supply from either the likes of AE or even a distributor would make putting a complete car together impractical and that is before you look at the logistics such as full step by step instruction manuals, kits boxing and packaging etc etc....
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#30
|
||||
|
||||
It looks the mutts nuts. Bet it turns on a 10 pence piece
|
|
|