|
#1
|
||||
|
||||
Madrat Setups
The madrat/xpro buggy is getting more popular please post your setups here.
__________________
DO NOT BUY/SELL TO THIS USER. |
#2
|
||||
|
||||
ok i will start
proline dirt arena 35wt fron 30rear inside hole front outside on the wishbone middle hole rear outside on the wishbone with a 17T brushed and 3700mah cells and proline holshots ribs on the front
__________________
DO NOT BUY/SELL TO THIS USER. |
#3
|
|||
|
|||
what set up would i need for my madrat i am using brushless mamba castle and 8.5 turn motor and what pinion gear what size .and scream as its set off but when i put in reverse its fine. nose when set off . i am using brushed .till i sort it out but then brushless power here we come
|
#4
|
||||
|
||||
Quote:
__________________
Hobao H2 Pro xbox/ps3/Wii U : budge1972 (add me) |
#5
|
||||
|
||||
Until I get the shocks working freely, not much point in playing too much, so far,
Front, kit locations, pistons drilled to 1.2mm, 35wt oil, B4 steering blocks. Rear, kit locations, pistons drilled to 1.4mm, 30wt oil, nortech o-rings (make a hell of a difference) Got loads of rear grip, lacks front end, been winding up the servo saver to make it more positive for now.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#6
|
||||
|
||||
Quote:
|
#7
|
|||
|
|||
thanks super sparks what pinion people use for outdoor track. i can not do indoor track its hard to get there with all the buser . so i will be doing marley track on sunday
|
#8
|
||||
|
||||
Which motor are you wanting to run in your madrat on Sunday?
|
#9
|
|||
|
|||
4600kv mate mamba castle i got this morning buzzing
|
#10
|
|||
|
|||
james have you got any spare pinion gear lend me for racing on sunday . if not need go get some modelshop
|
#11
|
||||
|
||||
Thats equal to a 12 turn brushed? Id start at about 16 - 17 tooth pinion and go from there... Unfortunately Im a little short on 48dp pinons, but im sure the guys at the club will have something
|
#12
|
||||
|
||||
I've only run the car at Lee's CML Raceway but that was completely standard, even the kit 20 tooth pinion (i think) on a Novak 6.5 and Reedy Lipo.
The one thing i will work on is the Weight of the car, and also the Slipper set-up as i couldn't get it to slip, just wheelie all over the place.... Set-up wise even in kit form the car was really quite good, Lee's track doesn't really have any random bumps etc but plenty of big jumps, tight turns and fast sections so i was really pleased with how it was turning in and generating loads of traction.
__________________
|
#13
|
||||
|
||||
hi all
i got mine on friday ran it saturday and love it i the only thing i did is put 40wt shock oil in front and 50wt in rear, i was running it on lipo with 17.5 losi b/l system, ok it was'nt keeping up with the others as they where running 10.5 and 9t but it handled realy well and jumps great. i dont think it needs a lot of tinkering the only thing i'm getting for it is better tyres and a 9t b/l for it. Ginge
__________________
Reality Racing - Team Associated - Savox - CML |
#14
|
||||
|
||||
what do you think 9t or will a 6.5 be better could it handle a 6.5 or will it be to much?
Ginge
__________________
Reality Racing - Team Associated - Savox - CML |
#15
|
|||
|
|||
6.5 will be fine in it, but if you are a relative beginnerthen you may find a 7.5 or even 8.5 easier to drive at first. a faster car does not guarantee a faster laptime! first rule for beginners!
__________________
4wd - X4TE 2wd - X2C (Mad Rat passed down to son!) Ansmann Racing UK RIP - MicroTech Racing Trader Feedback |
#16
|
|||
|
|||
hi,
I relatively new to 2wd off road , i only race at one track at the moment which is mostly astroturf , its quite bumpy for astroturf and has several small jumps and one large tabletop jump. Up until now i have been running the standard XPro setup apart from the shocks i have 35w in the front and 30w in the rear , i also have several of the ''TeamC'' hopup parts including the brass lipo tray and the front hingepin holder with the brass weight inside it , also have a set of 30degrees caster blocks I was wondering if anyone could give me some advice on what i could change to suit the track i am running on , also i am using schumacher yellow spikes at the back and a choice of staggered or spikes for the front. Any advice would be greatly appriecated... Also im not sure on what rebound to go for as its the first time ive ever set some buggy shocks up... Thanks in advance |
#17
|
||||
|
||||
im looking to add some weight to the front, what sort of weight have people added ? 100/150g ?
found these, http://cgi.ebay.co.uk/STICK-ON-LEAD-...QQcmdZViewItem are these the sort of thing people are using ?
__________________
Rc18t madrat
|
#18
|
||||
|
||||
....
__________________
Hobao H2 Pro xbox/ps3/Wii U : budge1972 (add me) |
#19
|
||||
|
||||
should of tried a search 1st ignore my post sorry guys
__________________
Rc18t madrat
|
#20
|
||||
|
||||
I am currently running B4 shocks all round with blue front springs and silver rears, Schumacher yellows with hard blue inserts all round 40wt oil in the front and 30wt in the rear, front shock position outer hole on the tower and inner hole on the wishbone, camber link on the front in the outer hole giving a shorter camber link, helps the car steer a bit quicker, dont ask why as I dont quite understand why but it works, 40 grams weight on the servo possibly could do with a little more to stop the front from lifting, rear shock position middle on the tower, outer on the wishbone, car feels easy to drive, good balance of on power steering and of power steering in to a corner, 1 degree of front camber and 3 degrees on the rear, I think thats it so far but there is more to come out the car.using a Nosram Matrix evo speedo no fan, with a Losi 7.5 motor, Ko servo and KO helios spektrum radio, Trakpower 4900 lipos, kit 80th spur with 24th pinion.
Last edited by ConceptRacing; 14-09-2009 at 02:26 PM. Reason: more info |
|
|