|
#1
|
||||
|
||||
New 201 rear hubs
Any ideas on the part number and if these are on sale yet??
|
#2
|
||||
|
||||
#51504
|
#3
|
||||
|
||||
Thanks Chris
|
#4
|
||||
|
||||
My ones came through the post on Saturday, got them from Stella Models in Hk, fit is as per alloy hubs.
Pic of the hub : It maybe hard to see but it straightens out the rear camber link on the Vega, L/H side if looking from the front has the plastic hub fitted, the R/H side has the alloy tamiya hub fitted. Last edited by MHeadling; 02-09-2012 at 12:10 PM. Reason: . |
#5
|
|||
|
|||
Bearing size
What size ball bearings does the new hub take?
The outside bearing looks larger than the inside bearing. Thanks! |
#6
|
||||
|
||||
Not sure on the exact size but yes has a larger outer bearing, it all fits straight on with std bearings and crush tube.
Have a look at 511 manual as this should show bearing sizes |
#7
|
||||
|
||||
Would guess same as on 201 alu hubs, 1350 outer bearings.
|
#8
|
|||
|
|||
So the larger bearing that came with the 201 alu. hub fits directly onto this hub? If so, it is a 1350. The standard plastic 201 hub uses 1050 size. thanks again!
|
#9
|
||||
|
||||
Yes if you have the Ali hubs its a direct for bearings and crush tube
Didn't feel much of a difference tbh compared to the Ali hubs but loads of link positions to try out |
#10
|
|||
|
|||
What toe in do they give?
|
#11
|
||||
|
||||
0 deg as far as I'm aware
|
#12
|
||||
|
||||
Far too many holes for you to choose from Mark lol.
ps, you haven't replied to my pm ref. 511 part!!! Scott.. |
|
|