|
#1
|
|||
|
|||
custom Made 4WD
hey there, i thought i would post this up as a few people have asked about it!
This time last week i didn't have much to do so i set to the idea of making my Tamiya TT01 (touring car) into a 4wd Buggy, now i have seen pics of this done before on the INTERNET so i got my dreml and i began work. It was quite easy really, all i had to do is cut away at the chassis to allow the larger buggy wheels to fit on! after cutting away the plastic i slotted some b4 rear wheels onto the axles, i chose b4 rears wheels as the pin slot and hole size fitted perfectly onto the axle. However i also had to put some new shocks on to he front as the frount wheels would not turn with the old shocks on. to solve this problem i used some rc18mt alloy shocks which did the job well. I tested it last Thursday racing ageist both mardaves (i was using a mardave motor so i made sense to race the mardaves) and other buggy's, my best was 21 laps in 6 mins which was about average with the other buggy's so overall it well very very well! i will post some Better pics soon when i find my cam, however here are a few. thanks Kev Last edited by k£v!n; 28-10-2006 at 08:50 PM. |
#2
|
|||
|
|||
bit different
|
#3
|
|||
|
|||
wow you narrowered the front end quite a bit.
__________________
XTM Accelarator (GONE) Losi MF2 (Sold) Losi CR buggy "Race it til it brakes " |
#4
|
|||
|
|||
i wonder if its BRCA legal
i had one of these before when i first started out the TT01 spot on car tho, was perfect round corners jst didnt like modified motors hence change, cool tho |
#5
|
|||
|
|||
yeah, i dont intend of raceing it proberly, i only made it as i was board and my b4 need parts!
kev |
|
|