|
#1
|
|||
|
|||
tool set
Does anyone make a descent nut driver and hex druver set for sensible money. Need to get a decent tool set up for my KF2.
|
#2
|
||||
|
||||
Arrowmax do decent stuff. I started with a set from "dynamite" (I think) which had various drivers with a ratchet handle.
eBay has lots of sets http://www.ebay.co.uk/sch/i.html?_fr...ls&_sacat=2562 Typically you will need 1.5 2 2.5 mm Allen key, 5.5 and 7mm socket. Not had a Schumacher so can't say for sure Body reamer useful
__________________
I've got Araldite and a Swiss Army Knife - what more do I need? Yokomo YZ-2 No 4WD because nothing lives up to my original Optima. Until now maybe?... |
#3
|
|||
|
|||
Thanks any other recommended tools ?
|
#4
|
||||
|
||||
I use these, they are a really good fit. I was surprised how good they are.
http://www.hobbyking.com/hobbyking/s...dProduct=84089 http://www.hobbyking.com/hobbyking/s...dProduct=84054 |
#5
|
|||
|
|||
I use the Arrowmax tools and have found them to be very good, available locally too.
|
|
|