|
#1
|
||||
|
||||
XB4 Front Bulkhead supports
I got fed up with breaking or worrying about breaking the bulkhead on my XB4 2015 so I drew up and had made a 3mm carbon brace. Well 2 different types actually as I was talked into it buy a fellow racer
The first type is attached using the lower 2 screws each side and the top larger holes are there so the shock tower remains attached when changing the front diff. The second type is attached using all 3 screws each side but this does mean 2 more screws to undo when changing the front diff and the shock tower wont be attached so slightly more of pain to change the diff. Both have a recess in the back to clear the diff case as this is slightly thicker than the tower. I have a few of each left over to sell complete with screws, they are £10 each plus £2 p+p 2HF 3HF |
#2
|
||||
|
||||
Very nice, I like the thought of the 2 holes.
Shame that this is a problem that could eaisly be fixed by xray. So many think that the alu brace that was released helps against this but that release was only for the thin ballstud on tower problem. |
|
|