aero4 steering

ryan · #1 23-10-2006

hi,
i have just finished making the prototype aero4 and when i tested it it had more steering one way than the other as i have moved the servo the arm that linked the servo to the mechanism was made shorter. i set the servo in the middle and the wheels straight and made a link that length. what have i done wrong? i tyred making it longer but it didnt do anything.

Ryan

BenG · #2 23-10-2006

maybe the steering columns arent aligned properly

jimmy · #3 23-10-2006

get some photos up so we can see what you mean, its hard to offer advice without seeing it

jim76 · #4 23-10-2006

is this a case of the car physically has more lock one way than the other, or is it just a case of adjusting the steering balance on your transmitter?

DCM · #5 23-10-2006

More than likely you may need to off-set the steering horm by a spline to cater for the arc the horn puts the ball stud through.

ryan · #6 23-10-2006

i measures the length againand filed a little of the wishbone and it is going to full lock now

probarly just me being a div. lol. i'll get some pics up of the car later.

ryan