|
#1
|
|||
|
|||
Steering bell issue YZ4
I bought the aluminium servo mount for my Yz4 and have fitted a Savox 1258TG for the buggy. But when fitted I noticed the steering was tight and on further inspection noticed the steering bell is rubbing the front of the servo. Has anyone else had this problem? I peeled off the plate on the front of the servo with the details on and it still rubs the plastic case slightly.
Thanks Matt |
#2
|
||||
|
||||
Please post a photo.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#3
|
|||
|
|||
Here you go
|
#4
|
|||
|
|||
And again
|
#5
|
|||
|
|||
I am not sure why they chose to use bigger bearings on the plastic parts, their line of servos is probably slimmer. If it is a major issue, you can solve it by using the aluminium bellcranks Z2-201BA and four 5x8 bearings.
|
#6
|
|||
|
|||
Thanks Mes
|
#7
|
|||
|
|||
You are welcome!
|
|
|