|
|
#1
|
||||
|
||||
Build tips
For the newby builder
i think it would be good if we use this section for build tips. 1st for me is the fact the manual says in mid motor form to build it in 3 gear form, and rear in 4 gear. i would recomend doing this the other way round. as the car will handle better in 4 gear mid motor with the motor plate on the right hand side if looking from the car from the front.
__________________
Answer RC team driver Formby models HB Racing D216 HB Racing D418 www.kandmacoustics.co.uk |
#2
|
|||
|
|||
i just bought the h2 and am in the middle of buiding the gearbox , i was just wondering why it is better to build 4 gear over 3 gear?? Would it be stronger?
|
#3
|
||||
|
||||
in 4 gear it puts the motor in the same rotation as the wheels. this gives better drive from what i understand
__________________
Answer RC team driver Formby models HB Racing D216 HB Racing D418 www.kandmacoustics.co.uk |
#4
|
|||
|
|||
Could someone explain. Bumpsteer to me please .
|
#5
|
||||
|
||||
in very short, as the suspension compresses, the distance between the ball studs increases and decreases. The link stays the same so the conmpression forces the steering spindles to get pulled or pushed. You need to use spacers under the steering link ball studs in order to dial it out. Unless you want it that is. in theory bump steer should give you slightly more aggressive steering
__________________
Stephen Smith Answer RC Team HB Racing | Team Orion | Xpert | Racing Experience |
#6
|
|||
|
|||
anti squat
Hi thanks for the answers this is making me remember some things that i have forgotten over the years , its been about 20 years since i was racing buggys . Sorry to be a pain but could someone run me through anti squat on the rear please just to jog the old memory...
|
|
|