Lipo Retainer now at Nor-Tech

[nickhudson]

i'm very pleased to announce that the Lipo battery retainer will now be available through the Nor-Tech Racing shop http://nor-tech.gforceimages.net/store/

All existing orders will be shipped by myself next week and Northy will have then in stock a couple of days later.

thanks

Nick

[stegger]

Nick if you are at worksop next week can i get mine of you then

[nickhudson]

PM'd

[jayst]

i will be goin nick . i can take it along

[Chrislong]

Mine arrived this morning, and is currently on my new Cat SX with Trakpower 4900 Lipo and it fits perfectly. Very nice!!! It looks good enough to be something Schumacher should have put in the kit.

100% recommend to all Lipo SX owners!!

Although for any Lipo lower than the 4900 Trakpower the cell post is too tall, so this is a simple fix of putting a shim over the battery brace under the clip, or putting some foam on the underside of the battery brace to fill the gap.

[nickhudson]

thanks chris - glad you like it

[Northy]

Now officially IN STOCK

[Chrislong]

And a little birdie tells me you'll have a few to take to Worksop - and I reckon you won't be bringing them home.

[Northy]

Originally Posted by Chrislong

And a little birdie tells me you'll have a few to take to Worksop - and I reckon you won't be bringing them home.

I'll have my shizzle with me

G

[F-1]

is this lipo retainer fit new Reedy Lipo 5000 mah 35c??

[nickhudson]

got this from the associated website :-

Specifications:

• Length: 138.5mm
• Width: 46.0mm
• Height: 25.0mm
• Weight: 295g
• Discharge: 175A continuous, 200A‐225A burst
• Passes UN T1‐T8 testing

Source : Team Associated


the official 4900 trakpower dims are 137x46x23 so the reedy is longer, narrower and taller. it would be a tight fit on length and height but i built in a bit of 'play' to the design. the only sure-fire way is to try it

hth - nick

[deepdale11]

Hi, I have brought a Car SX 6 cell version but i have converted it to lipo, does anybody know if this lipo retainer will fit a 6 cell chassis and will a team orion 5000 lipo battery fit it?

Thanks

[Chrislong]

Originally Posted by deepdale11

Hi, I have brought a Car SX 6 cell version but i have converted it to lipo, does anybody know if this lipo retainer will fit a 6 cell chassis and will a team orion 5000 lipo battery fit it?

Thanks

Why would you do that? Just convert it to a Lipo car properly. Once you have the Lipo chassis on the Lipo retainer will fit. Lipo is not intended to fit the Nimh chassis so its highly likely the retainer won't fit - but hey, that chassis wasn't for Lipo, it was for nimh thats why its called the nimh chassis.

You could drill the chassis to suit though

[deepdale11]

Just asking, the reason i haven't brought a lipo chassis is they are £60 which i think its a lot of money!!!!! for something thats not much different??

[Chrislong]

Fair enough. But like I said, you can drill the Nimh chassis around to suit, I doubt any holes for cell mounting will line upotherwise.

[Rich D]

PM`d Northy ! Save me one

[sime46]

Got one of these and fitted it at worksop. Awesome!! Looks mint and fits perfect. Looks like oem. Had to dremel a tiny bit to suit my lrp lipos(.5mm). Really pleased so big thanks to Northy for supply and Nick for design. Top stuff, you shouldn't run a lipo Cat without one!!

[nickhudson]

nice one !!

[ben]

Originally Posted by sime46

Got one of these and fitted it at worksop. Awesome!! Looks mint and fits perfect. Looks like oem. Had to dremel a tiny bit to suit my lrp lipos(.5mm). Really pleased so big thanks to Northy for supply and Nick for design. Top stuff, you shouldn't run a lipo Cat without one!!

Agreed! Got mine at worksop and it's a perfect fit!! Good JAB guys!

BEN

[telboy]

Yep, I conned one out of G too. Excellent peice of kit....even get the 'bling nuts'!

Soo much beter than messing around with the velcro.