TD Customer service

[trap121]

Does anyone have an email for TD other than the sales one? I have a problem with my kit and I emailed the sales one but havent heard anything from them

[trap121]

Since I cant get in touch with TD I will post my problem on here. Hopefully they will see it and contact me.

I finished putting my kit together saturday and have a few issues. I only recieved 1 droop screw and both my front cva's are bent. I sent this video to TD so they can see what I see....http://www.youtube.com/watch?v=sTmCl3uJu7k.

For a kit this expensive there should not be missing parts and bent cva's. Has anyone else experienced this?

[bigred5765]

did you try doing that without the boots on to see if ther not actully bent but being held low in the diff out puts makeing them look bent,or seeing if you lift them with a finger it makes make look worse??

[Jedi Master]

Originally Posted by trap121

Since I cant get in touch with TD I will post my problem on here. Hopefully they will see it and contact me.

I finished putting my kit together saturday and have a few issues. I only recieved 1 droop screw and both my front cva's are bent. I sent this video to TD so they can see what I see....http://www.youtube.com/watch?v=sTmCl3uJu7k.

For a kit this expensive there should not be missing parts and bent cva's. Has anyone else experienced this?

Nothing misiing in mine and nothing bent either. I've had great responses to my queries, both on here from Adam and also from the sales e-mail.

[TRICKYNICK]

Thats not good

You say they haven't replied to your emails so have you tried talking to the shop you bought it from to see if they can help?

[jimmy]

Mine look fairly similar having just looked - they aren't bent though. Are you sure you have the diff gear nicely seated on the outdrives?

Nick - he never said they won't reply to his emails

[trap121]

Yeah, I took the boots off and tried it. Still bent. I took the diff apart and checked everything, reassembled it and still bent

[trap121]

Originally Posted by TRICKYNICK

Thats not good

You say they haven't replied to your emails so have you tried talking to the shop you bought it from to see if they can help?

I bought it directly from TD. I said they havent responded yet. Iam sure they will, I just wanted to see if anyone else had this issue and hope they see this thread.

I thought that might be the way they sit but taking it apart didnt help. The rear ones are fine and dont wobble at all

[mark christopher]

Originally Posted by trap121

Since I cant get in touch with TD I will post my problem on here. Hopefully they will see it and contact me.

I finished putting my kit together saturday and have a few issues. I only recieved 1 droop screw and both my front cva's are bent. I sent this video to TD so they can see what I see....http://www.youtube.com/watch?v=sTmCl3uJu7k.

For a kit this expensive there should not be missing parts and bent cva's. Has anyone else experienced this?

dont see how you can say there bent by whathing the video, the inner end off the dogbone will wobble like that as its not fixed in the outdrive but loose, mine does the same, but the shafts aint bent

have you followed this guide to questions you have?

http://www.oople.com/forums/showpost...7&postcount=28

i had some screw in the wrong bags , but have to say the responce was brilliant, and quick, try using the email addy in the above link and NOT the sales one

[trap121]

How bad do you guys think this will affect the car on the track? I planned to race this sat but maybe not now

[trap121]

Originally Posted by mark christopher

dont see how you can say there bent by whathing the video, the inner end off the dogbone will wobble like that as its not fixed in the outdrive but loose, mine does the same, but the shafts aint bent

have you followed this guide to questions you have?

http://www.oople.com/forums/showpost...7&postcount=28

i had some screw in the wrong bags , but have to say the responce was brilliant, and quick, try using the email addy in the above link and NOT the sales one

So you think its just the way they sit?

Thanks for the email address

[mark christopher]

Originally Posted by trap121

So you think its just the way they sit?

Thanks for the email address

yup
only way to tell if there bent is take em out the car, strip em and rund the shaft on somthing flat with the ends over hanging, hard to explain but the shaft needs to run on somthing flat, and see if the ends move out of true

Adam and the guys will help you so dont panic mate

[bigred5765]

take them out of the car, and find a stright edge long enough to fit on the shafts move it round the shaft that will show if it really bent or not

[jimmy]

Originally Posted by trap121

So you think its just the way they sit?

Thanks for the email address

Just had another look and yours look no different to mine tbh and mine is fine and dandy.

[Full Metal Jacket]

Originally Posted by trap121

Does anyone have an email for TD other than the sales one? I have a problem with my kit and I emailed the sales one but havent heard anything from them

They might went to IFMAR event.

[trap121]

why would the front wobble and the rear be fine? They both sit in the outdrives the same way

[mark christopher]

length and angle of dangle?

[trap121]

Also forgot to mention that my chassis rails are mismatched.

3 emails and 1pm and still no word from TD

[azure]

I'm having the same problem - no reply since Monday. Maybe they are stuck in South Africa with a huge hangover from winning the Worlds. I see they sold out of cars, so maybe they hit their sales target for the month early and gone home

[telboy]

Hmm, I was going to say are the wishbones level, but looking at the clip, they are. Could just be play, Should be ok to run.

I'd give them until next week at least, as Adam is on his hols at the moment, and I would think he's better placed to answer that sort of question.