201 - Sheet up sheets

[tony6187]

Originally Posted by pidge

well f-r are washers on the arm (i.e - wheel base)

High - low - the rear block has a high and a low if you turn it upside down. so i run low - to give more antisqwat...

cheers lee

[tony6187]

what anti squat are you running?are you running with the spacer under the front arm mount at the rear?

[Lee Martin]

i run spacer in the front and rear mount lower.

[DCM]

Lee, which rear suspension mount do you mean, that can be mounted in a 'low' and 'high' position?? I just been looking at mine, and it doesn't look like the rear one can?

So, is it the R-F or R-R mount?

[Fredrik Emilsson]

Note that Lee is running the optional alu suspension mounts.
And it´s the rear suspension mount that can be installed upside down. Moves the suspension mount 1 mm

[DCM]

I didn't realise there were any released yet?

[DCM]

Release date - 18th Aug, bum!!

[Fredrik Emilsson]

That´s not a problem for Lee.

[GRIFF55]

not sure if they are steve, but lee is the factory driver so he will have the bits first!! hahaha

If you find these or the .5 deg rear hubs online, can you put a link up please?

[DCM]

54242 R-F 3' mount
54243 R-R 3' mount
54245 0.5' rear upright
54256 1.0' rear upright

[tony6187]

also just noticed lee is running tamiya blue front springs? are these from the 501?

[LhOrLoGeR]

Originally Posted by tony6187

also just noticed lee is running tamiya blue front springs? are these from the 501?

Yes:
Brown-black-green-red-yellow-blue

[tony6187]

Originally Posted by LhOrLoGeR

Yes:
Brown-black-green-red-yellow-blue

cheers

[fastinfastout]

how does the green(hardest) 201x front spring compare to the 501x front blue?