shock piston making service

[gixxer]

I am offering my services for cnc machined pistons, supplied blank for you to drill whatever size holes you want and to your own spec ie tapered or flat/standard

Let me know if its of any interest

Cheers john

[DrPaul]

What sort of price are we looking at for a set of 4?

[DragonRider]

Originally Posted by DrPaul

What sort of price are we looking at for a set of 4?

+1 Very interested

[coleman758]

I'd be very interested if the price is ok?

[bigt]

I'd be up for a bag a blanks dude my machinists always to bloody busy a delrin jig to hold um in for drilling too send me your addy and I'll draw the idea up 16mm tapers too ?

[john333]

another interested party here, want some team c big bore pistons to mess about with

[john333]

sorry double post

[gixxer]

I would say about a quid each what does everyone think of that?

Also I will need measurements/drawings or one to copy

[gixxer]

I currently have interest in the following pistons.

Kyosho small bore
Kyosho big bore
Hobao h2


Keep em coming

[DragonRider]

Please add Schumacher SV2 Big Bore

Cheers

Mark

[gixxer]

i will mate when i get measurements for them the ones listed are ones i have drawn up ready to be made

Originally Posted by DragonRider

Please add Schumacher SV2 Big Bore

Cheers

Mark

[markw]

Wat about for the k1? I have a spare piston send u that came in the kit.

[gixxer]

Yeah I can do them for th K1 I'll pm you my addy if you want to send it to me, here is the first RB6 run that are going to be tested
Also I have done some for a h2 with revised sizes once they are tested for fit I'll report back

[Sportp4ck]

Originally Posted by gixxer

Yeah I can do them for th K1 I'll pm you my addy if you want to send it to me, here is the first RB6 run that are going to be tested
Also I have done some for a h2 with revised sizes once they are tested for fit I'll report back

WOW, can you make them from P.T.F.E?

[gixxer]

I can't remember what this stuff is called but its very similar to the stuff on non stick pans the only ptfe I can get hold of is very soft and hard to hold a tight limit on and is also sensitive to moisture

[NeilRalph77]

You should do some for the Rango big bore's cos they don't.

[gixxer]

I'll make them for any car all I need is measurements or one to copy

[mattr]

Originally Posted by NeilRalph77

You should do some for the Rango big bore's cos they don't.

+1 what dimensions do you need? ID, OD and thickness? the Durango Pistons (big bore and small bore) have a counter bore in the centre, would this cost extra? I'd probably look at getting 20 ish of each...... 5 or 6 sets (how much to post to Sweden?)

[gixxer]

Originally Posted by mattr

+1 what dimensions do you need? ID, OD and thickness? the Durango Pistons (big bore and small bore) have a counter bore in the centre, would this cost extra? I'd probably look at getting 20 ish of each...... 5 or 6 sets (how much to post to Sweden?)

I need the od hole and c/bore dia c/bore depth thickness
The price will be the same with a c bore as for postage I don't have a clue mate

[NeilRalph77]

Rango bigbores:-

12.3mm O/D
2.5mm Thick
2mm Through hole
C/Bore 2.6mm Dia x 1.6mm Deep