BK2 axles... options

[Body Paint]

I can't find any BK2 axles anywhere :-(

With the stock of BK2 axles apparently all gone, what are the options to push the driveshaft far enough into the outdrive to gain enough droop?

[Lee]

drill the hole 2mm further out on the AE axle, i have done it with a pedestal drill, its not dead easy but it is possible

[bigred5765]

yipp what lee said,

[_sleigh_]

I smell an opening for a "TrishBit" edition axle...............

[niggs98]

trish is already doing them if you send him a set of axles, i know of a couple of peeps who have already done this with good results

[_sleigh_]

I knew he'd be on the ball...

[Body Paint]

"TRISH!!!!!!!"

[Big E]

You can get really close to our droop with the stock axles to be fair, not bang on but close but the issue with the B4 ones is that if you raise the tranny you have to limit the shocks.

As the others have said though just get the B4 ones drilled and run thin nuts.

But we are also fully on sorting the issue out as well.

Didn't know your car used BK2 axles any way

E.

[strobe]

Craig.
Have you tried the Bay?

[David Church]

Originally Posted by Big E

You can get really close to our droop with the stock axles to be fair, not bang on but close but the issue with the B4 ones is that if you raise the tranny you have to limit the shocks.

As the others have said though just get the B4 ones drilled and run thin nuts.

But we are also fully on sorting the issue out as well.

Didn't know your car used BK2 axles any way

E.

What you saying Ellis?????

[Body Paint]

Originally Posted by Big E

You can get really close to our droop with the stock axles to be fair, not bang on but close but the issue with the B4 ones is that if you raise the tranny you have to limit the shocks.

As the others have said though just get the B4 ones drilled and run thin nuts.

But we are also fully on sorting the issue out as well.

Didn't know your car used BK2 axles any way

E.

Who said it was for my S2 ;-)

It might just be that you have turned me damn you

[janus_77]

other option:

Costum axle.jpg

[Body Paint]

Cheers Hugh

I wondered what those crazy shafts were all about

Drilling the shafts looks like the easier option though.

Originally Posted by janus_77

other option:

Attachment 3820

[oscarin2000f]

But this doesn't seem to be a custom axle, it seems to be a custom Bone!

I don't want to know how you did it... Yes! i want to know!

is it an aluminium tube! have you cutted the bone! and... glue the bone to the tube?

Thank you for your help.

[matdodd]

Trish has some to do for me not sure if there done yet though!
So give him a shout mate.
Trish?

[super__dan]

Got an X6 Matt?

[Kopite]

they'll be for his S2 Dan

[matdodd]

They were for my S2 Dan

[Lee]

I thinks its for his S2 Dan

[Northy]

I'd like to bet he'll be using them on his S2 Dan

G