|
#1
|
||||
|
||||
B44 CVA Pin (7381)
Does anyone have a good supplier of CVA pins (item 7381) for the B44? I seem to remember seeing a post about these a while ago but cannot find it now.
All i require are the pins, not the entire CVA rebuild kit. Thanks
__________________
Associated B44.2, Nosram Pearl Evolution ESC, Fusion Exceed 6.5T , 4200 Lipos, Savox
Last edited by The Bod; 03-10-2014 at 11:32 PM. |
#2
|
||||
|
||||
Surely someone has???
__________________
Associated B44.2, Nosram Pearl Evolution ESC, Fusion Exceed 6.5T , 4200 Lipos, Savox
|
#3
|
||||
|
||||
Cva rebuid kit it is then
__________________
|
#4
|
|||
|
|||
Hi, I'm not an associated man personally so don't know the exact dimensions of the pin in question but I use www.accuscrews.co.uk for all my hardware. They do imperial and metric stuff in a choice of materials. You have to buy a certain number per item (normally 20, 50 or 100 of each) but the unit price is so cheap that it normally works out massively in your favour (7 to 10p each for small dowel pins etc..).
Take a look this might be the way to go. |
#5
|
|||
|
|||
Hi Graham,
I think I used Avid 1/16 axle pins; Avid part number AV-375, from JEModels. Currently out of stock, but someone will have them. I think you get 10 in a handy dispenser. Hope you're doing ok. Ed |
#6
|
||||
|
||||
Hi,
The axle pins are instock at P-DubRacing: http://p-dubracing.co.uk/index.php?m...roducts_id=171 MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
#7
|
||||
|
||||
Thanks Mick and Ed
Have ordered some from pub
__________________
Associated B44.2, Nosram Pearl Evolution ESC, Fusion Exceed 6.5T , 4200 Lipos, Savox
|
|
|