|
#1
|
||||
|
||||
Can I just swap Novak rotors over?
Hi,
I have a Novak Velociti 3.5 sintered and a Velociti 5.5 bonded, and basically I want to know if I can just take the sintered from the 3.5 and slap it in the 5.5 without problems such as cogging at slow speeds etc? I could just try this, but I'm being lazy I suppose. And why bother if someone knows right? I know the LRP ones come in different lengths of rotor and the long ones will cog at low speeds in a 5.5 X11. Are the Novak ones similar? Thanks in advance.
__________________
X-5^2 :: CR2 :: XXX-T MF |
#2
|
||||
|
||||
They can be swapped between all the velocity range from Novak.
MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
#3
|
|||
|
|||
Sintered rotor will help prevent clogging in sensorless systems. I have used a 5.5L sintered with a tekin R1 sensorless esc and it worked A1.
|
#4
|
||||
|
||||
Cheers guys.
That's really good to know. Happy racing.
__________________
X-5^2 :: CR2 :: XXX-T MF |
|
|