Hobbyking 120a x-car esc

[Sebbyseedbreed]

What alternative program card could i use on this esc as hobbyking do not have the program cards in stock!!

Regards

[No. 46]

I think you can use a hobbywing program card and also upload the hobbywing software to the speedo

[terry.sc]

Wouldn't bother with the Hobbywing 3in1 Multifunction Program Box and as well as a much better interface to program the ESC it also allows you to replace the X-car firmware with Hobbywings own, giving you many more functions.

[Sebbyseedbreed]

So what would the best card to get?

[butters86]

I have the same ESC - love it! But I use the USB link lead from hobby wing. It's about £3 and lets you upgrade to latest firmware or modified firmware and the programming software is great. You set all your parameters such as turbo settings, timing, reverse, break power, drag break, etc. And the software is free & easy to use.

I know it's less portable so may not be what you're after but I think it's cool that you can plug your laptop into your RC car and change some settings in the pit!

[Sebbyseedbreed]

Thanks bud, will look into this

[terry.sc]

Originally Posted by Sebbyseedbreed

So what would the best card to get?

One of these http://www.jemodels.com/index.php?ap...oj2qrh927144ko and use the software available here http://www.hobbywing.com/product_show.asp?id=218

[Mr_John]

You can buy a hobbywing program card on the ebay.

[Northy]

Is this the speedo you talking about?

http://www.hobbyking.com/hobbyking/s...nsorless_.html

Is it any good?

G

[dazp83]

Yeah I've had a couple of these and they're good for the money. Rebadged hobbywing 2.1

[Northy]

And it will run the genuine HW software?

Is anyone making a cheap copy of the HW V3 that will run the HW software?

G

[Sebbyseedbreed]

I recieved mine today, just doing some research on what i can do with it. By the sounds of it you can change the software to hobbywings and then use a hobbywings programme card to make adjustments. I think im going to go down this route if correct

[dazp83]

Yeah download the hobbywing software off the hobbyking site. I've only used the usb link.
Don't know about the 3.1 but the skyrc esc are as good as anything, the new ones with aluminium case are much better.

[terry.sc]

Originally Posted by Northy

And it will run the genuine HW software?

The X-Car is technically not a direct copy of the v2.1, but it certainly uses the same processor and comes with a very early basic version of the Hobbywing software. If I remember correctly you have to go through a couple of firmware versions to get it up to date but it will run Hobbywings v3 software for the XERUN v2.1 ESCs

[guinness]

Speed passion software works too,i have two of this ESC ,they are great.

[Sebbyseedbreed]

Ran this speed controller on 2 club nights, 1st night on stock hobbyking firmware and tonight on Hobbywing v3.1 and was 2 laps quicker. Best £27 ive spent.

[ayske1]

Had this esc for four months, started cogging towards the end. Funny enough moved onto a used v2.1. Lot more punchy.

[honrico Diablo]

I've had mine a year. Cheap as chips, but doesn't seem to respond to changes I make either with the lap top or card.. Well, not that I can tell! My other speeds small changes are noticeable instantly.

[Northy]

I bought two Hobbyking 120a x-car escs for a couple of vintage cars and I've just updated them to V3.0_110930_MOD using the Hobbyking USB dongle job done

G

[fidspeed]

even cheaper 120a esc from flea bay now under 15 quid

I have 3 all running HW stock software only thing to beware of is that A and C wires are wrong colors no worry as long as you remember

fid