|
#1
|
|||
|
|||
Thoughts on my B4/X-6 shock tower
Hi all...
As some of you may have remembered on my own mid motor car i had my own front shock tower with additional shock mounting points... Well, i dug it out 2day and modded it so that it looked more reasonable... I need to send some pics to fibrelyte so i can ask about the cost of making it in 3/4mm CF... What you do you think? Tah, Tom
__________________
Team Losi Racing, Horizon Hobby TLR 22 5.0, TLR 22X-4, TLR 22-4, 22-4 2.0 Atomic Carbon S2, S44, Vega B4.1 Trader feedback: http://www.oople.com/forums/showthread.php?t=19374 |
#2
|
||||
|
||||
looks ok Tom i would be interested in a carbon fibre one
__________________
|
#3
|
||||
|
||||
I'd use 3 or 4mm not 3/4mm cf look on their web site for a similar tower then ad £2 or £3 for a 1 off
__________________
o0ple Trader Feedback NE Venue's New & Old my space on YouTube CFR RCTV Channel Glenn Atterton BRCA 2005 1/10th Off-Road Veterans Champion LMP12 National Champion 2003/2004 / F3 class |
#4
|
|||
|
|||
You may or may not of seen but we have just had a carbon tower made for the X6 (and B4 etc) which mounts to the K Factory alloy mounts. We have taken off shock koles (unused ones) interestingly since we thought 4 was too many and they never all got used (you have added more we see) we have also added material around the top shock holes as a "scuff zone" for when we put it upside down on an abrasive track etc, we have also added two support struts to increse the strength and lastly pre-drilled them for the mounting of a wing like the J Concepts one, see what you think, compare ideas etc, it is on our website in the DMS Partz section, then in Upgrade parts - X-Factory
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#5
|
|||
|
|||
Thanks for the input...
I want to make more camber link positions aswell, an extra hole and then 2 more above those three... like.... _ -_- _ If that makes sense? its not a final design jus an idea, that way the kfactory alloy parts are not needed... Ill have a look Darren and see if its worth me making this. Thanks, Tom
__________________
Team Losi Racing, Horizon Hobby TLR 22 5.0, TLR 22X-4, TLR 22-4, 22-4 2.0 Atomic Carbon S2, S44, Vega B4.1 Trader feedback: http://www.oople.com/forums/showthread.php?t=19374 |
|
|