Go Back   oOple.com Forums > General > 12th & 10th On Road

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 15-10-2014
mark christopher's Avatar
mark christopher mark christopher is offline
Spends too long on oOple ...
 
Join Date: Jan 2007
Location: haxey, doncaster
Posts: 7,787
Send a message via MSN to mark christopher
Default NEW supastox GT

http://www.racing-cars.com/pp/Car_Sh...paStox_GT.html

Features
  • 2 Kit Options Available;
    K154 - SupaStox GT Kit - S1/Diff
    K157 - SupaStox GT Kit - C/F

  • NEW - Lightweight Low Centre of Gravity CNC Alloy Motor Mounts.
  • NEW - Pivot Ball Rear End with Front to Back Tube Damper for Improved Bump Riding.
  • NEW - Adjustable Rear Ride Height Via Rear Axle Adjusters.
  • NEW - Adjustable Front Ride Height on King Pin.
  • NEW - Rear Tweak and Roll Stiffness Adjustment via springs and spring position.
  • NEW - Adjustable Rear Droop with droop screws.
  • NEW - Adjustable Front Droop screws.
  • NEW - Shorter, Narrower and stiffer 2.5mm Carbon Fibre or 2.5mm S1 Composite Chassis.
  • NEW - Small Kimbrough Servo Saver with Strengthener Included As Standard for improved Steering Geometry.
  • NEW - Lightweight Front Foam Bumper and Mounting For Great Protection.
  • NEW - Included Ball Bearing Front Wheels.
  • NEW - Tweak Free Battery Mounting with Tape. Option Battery Strap Available.
  • NEW - CNC Brass Weight Position on Rear Pod for Better Balance.
  • NEW - Chassis Weight Balance Pivot Holes. For Use With U3582 Pivot Set.
  • NEW - Adjustable Ackerman with Washers.
  • NEW - Pivot Front Suspension With Camber, Castor, Droop And Toe-in/out Adjustment.
  • NEW - Improved Ground Clearance Rear Body Mounting.
  • NEW - Multiple Servo Mounting Positions.
  • 70T 48 dp High Efficiency Spur as Standard.
  • Chassis accepts 1S or 2S Shorty.
  • CNC Alloy Drive Dog Outputs For Precision And Durability.
  • CNC High Tensile, Stainless Steel Rear Axle.
  • High Tensile, Stainless Steel Suspension Pivots.
  • Hign Tensile Steel Hex Screws Used Throughout.
  • Adjustable Steering Turnbuckles Included As Standard.
  • Ball Raced Rear Axle With Rubber Sealed Bearings.
  • High Quality Easy to Follow Instruction Manual.
  • Large Range Of Optional 32 and 48dp Spur Gears.
  • Fully Adjustable Body Mount System.
  • Contact Pre-glued And Trued Foam Tyres Included, 35sh Rear and 47sh Front.
  • Full Range Of Optional Colour Coded Springs.
  • Accepts A Huge Range Of Industry Standard Bodyshells, Motors, Batteries, And Speed Controllers.
  • Torsional Side Damping Adjusted with 'O' Rings or Speed Secret Optional Tube Dampers.






__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 05:39 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com